| Dialogic® Diva® System Release 9.5LIN - Technical Specification |
| Supported Dialogic® Diva® Media Boards |
|
Dialogic Diva BRI adapters:
Diva BRI-CTI PCI and Diva BRI-2FX PCI
Diva UM-BRI-2 PCI and PCIe
Diva UM-4BRI-8 PCI and PCIe
Diva BRI-2 PCI and PCIe
Diva 4BRI-8 PCI and PCIe
Dialogic Diva Analog adapters
Diva UM-Analog-2 PCI and PCIe
Diva UM-Analog-4 PCI and PCIe
Diva UM-Analog-8 PCI and PCIe
Diva Analog-2 PCI and PCIe
Diva Analog-4 PCI and PCIe
Diva Analog-8 PCI and PCIe
|
Dialogic Diva PRI/E1/T1 adapters (Version 3.0):
Diva PRI/E1/T1-CTI PCI and PCIe
Diva PRI/E1/T1-8 PCI
Diva V-PRI/T1-24 PCI and PCIe
Diva V-PRI/E1-30 PCI and PCIe
Diva UM-PRI/T1-24 PCI and PCIe
Diva UM-PRI/E1-30 PCI and PCIe
Diva PRI/T1-24 PCI and PCIe
Diva PRI/E1-30 PCI and PCIe
Dialogic Diva V-xPRI Series adapters:
Diva V-1PRI/E1/T1-30 PCIe (Half Size)
Diva V-2PRI/E1/T1-60 PCIe (Half Size)
Diva V-4PRI/E1/T1-120 PCIe (Half Size)
Diva V-4PRI/E1/T1-120 PCIe FS (Full Size)
Diva V-8PRI/E1/T1-240 PCIe FS (Full Size)
Diva V-2PRI/T1-48 PCI (Full Size)
Diva V-2PRI/E1-60 PCI (Full Size)
Diva V-4PRI/T1-96 PCI (Full Size)
Diva V-4PRI/E1-120 PCI (Full Size)
Dialogic Blue Telephony Boards:
Dialogic Blue OneSpan-24/30-S-LP PCIe (Low Profile)
|
| Application Interfaces |
- CAPI 2.0: For a wide range of CAPI-based ISDN applications
- TTY (modem emulation): For applications that communicate via the AT-command set
|
- Management Interface: For access to call state/ status/ statistics and line or interface events
|
| Supported connection types |
- Transparent: Enables voice connections
- Analog Connections: enables the support traditional modems as remote access clients1,2
- Fax connections: Class 12 , Class 22 and CAPI
- HDLC: for fast PPP over ISDN
|
- X.75: HDLC with layer 2 error correction
- V.110: enables the support GSM mobile phone connections1, 2
- V.120: Enables connections to certain terminal adapters
- PIAFS: Enables mobile data connection with 32 and 64 kbps2,3
- X.25 / X.31: Enables packet-oriented connections via B-channel and D-channel
|
| Supported switch types (D-channel protocol) |
- ETSI-DSS1 (Euro ISDN)
- NET 3 (Belgium)
- VN3 (France)
- VN4/6 (France)
- 1TR6 (Germany)
- INS-64 (Japan)
- INS-1500 (Japan)4
- 4ESS (North America - AT&T)4
|
- 5ESS Custom (North America - AT&T)
- National ISDN (NI1 - North America)
- T1 - Robbed Bit Signaling4
- Channelized E14
- E1/R2 (China 1)4
- E1/R2 (India)4
- E1/R2 (Korea)4
- Pulse detection for R2 protocols4
- Q-Sig support for most PBX
|
| General Features |
- Support for ISDN basic-rate interface (BRI), ISDN primary-rate interface (PRI) and T1
- Support for ISDN lines with a transfer rate of 64 kbps or 56 kbps (e.g. USA)
- Support for channelized T1 (Robbed Bit Signaling) lines with a transfer rate of 56 kbps
- Support for Channelized E1
- Support for fractional lines
- Support for NT (Network Termination) mode for all Version 2.0 boards and all PRI boards1, incl. TEI assignment/ point to multipoint
- Automatic detection of Dilaogic Diva media boards
- Automatic protocol detection for incoming calls
|
- Automatic synchronous/asynchronous conversion
- Number configuration (including Direct Dial In) for all drivers
- B-channel and D-channel data trace (TR/RX) capability through management interface
- Includes Dialogic Diva Configuration Manager for easy configuration
- Dialogic Diva Web Configurator for Remote configuration and management
|
| Modem Emulation |
- TTY driver: with support for V.120, V.1101, 2, X.25, X.75 data modem, analog modem1 and fax class 12 / class 22 and PIAFS
- Generic Server modem
- V.42bis data compression
- V.42 error correction2
- Analog modem support1, 2
- V.18 standard for text telephone systems
- Bell 103 (300 bps) modem emulation
- Bell 212 (1200 bps) modem emulation
- V.21 (300 bps) modem emulation
|
-
- V.23C (1200/75 bps) modem emulation
- V.22 (1200 bps) modem emulation
- V.22bis (2400 bps) modem emulation
- V.32 (9600 bps) modem emulation
- V.32bis (14.4 kpbs) modem emulation
- V.34 (33.6 kbps) modem emulation
- V.90 (56 kbps) modem emulation5
|
| Fax and Voice features |
- Fax Group 32 and 4 support
- Fax modem emulation2 V.34 (33.6 kbps), V.17 (14.4kbps), V.29, V.29ter
- Fax class 1 and 2 support2
- Error correction mode (ECM)2
- Fax compression (MH, MR 2Dcoding, MMR T.6 coding)2
- Fax tone detection2
- Reversal of fax direction2
- Fax polling2
- Fax on demand2
- Standard, fine, super-fine and ultra-fine resolution2
- Color Fax on CAPI (JPEG)2
|
- Fax paper formats: ISO A4, ISO B4, and ISO A32, 6
- DTMF transmission and detection
- Generic Tone Detection and Generation1, 2
- Cross board switching and conferencing via line interconnect1, 3, 6
- Automatic Gain Control (AGC)1, 2
- Echo cancellation1, 2, 6
- Real time protocol1, 2, 6
- Comfort noise generation (CNG)1, 2, 6
- Voice activity detection (VAD)1, 2, 6
- Dynamic anti-jitter buffer1, 2, 6
- Voice compression (GSM, G.726)1, 2, 6
- DTMF Clamping and Filtering
- DTMF Collection (Post Dial Digits)
- Pitch Control
|
| Leased Line support |
- Support for Leasaed lines (LAN-to-LAN connections)
- Structured and unstructured
- 64/ 128 kbps transfer rate on BRI lines
|
- 1.5 Mbps transfer rate on T1 lines
- 2.0 Mbps tranfer rate on E1/ PRI lines
|
| Supplementary Features via CAPI |
|
6
- Number identification services (CLIP, CLIR, COLP, COLR, KEY, MSN, DDI, SUB)
- Call offering services (TP, CFU, CFB, CFNR)7
- Call completion services (CW, HOLD, ECT)7
|
|
| Q-Sig Features |
- Basic Call
- Number identification services (CLIP, CLIR, COLP, COLR, KEY, MSN, DDI, SUB)
- ECT (Explicit call transfer)
|
- HOLD
- Redirected Number
- Connected Name
- Advice of charge (AoC)
|
| Channelized T1 (Robbed Bit Signaling) Features |
- Trunk types: loop, ground and wink start
- Tone Dialing (DTMF & MF)
- Pulse Dialing
|
- Ringer- and busy tone generation/ detection
- Up to 56 kpbs transfer rate
|
| PIAFS versions |
|
2, 3
- PIAFS 1.0 - 32k Fixed Speed
- PIAFS 2.0 - 64k Fixed Speed
- PIAFS 2.1 - Best Effort (variable speed)
|
|
| M-Adapter |
| Miscellaneous |
| Codecs and Transcoding |