Hi All,
Can you pls help me to configure GTT in config.txt and how should i used the same to send MTU and MTR on linux.
My current PC+SSN is working fine but its failing with GTT. I just want to send GT based routing from MTU to MTR and MTR should respond back on GT routing itself.
I have written the ATI code and its working fine with PC+SSN but failing with GT.
Also can you tell me what should be the command to send MTU.
As i know only to send PC+SSN
./mtu -d7 -g43010093 -a43020006 -e918050484861 (this is working fine) what should be for GT based command.
Pls find below config
CNSYS:IPADDR=192.168.56.101,PER=0,DAUD=Y; * *SNSLI:SNLINK=1,IPADDR=10.0.2.15,SNEND=S,SNTYPE=M3UA,HPORT=2905,PPORT=2905; SNSLI:SNLINK=1,IPADDR=192.168.56.102,SNEND=C,SNTYPE=M3UA,HPORT=2905,PPORT=2905; SNAPI:AS=1,OPC=1,RC=1,TRMD=LS; SNRAI:RAS=1,RC=1,DPC=2; SNALI:SNAL=1,RAS=1,SNLINK=1; SNLBI:SNLB=1,AS=1,RAS=1; * * SCCP Parameters: * SCCP_CONFIG <local_spc> <ssf> <options> SCCP_CONFIG 1 0x93 0x0102 1 * * Uncomment to record SCCP traces (from s7_log) * SCCP_TRACE <op_evt_mask> <ip_evt_mask> <non_prim_mask> *SCCP_TRACE 0x3 0x7 0x3 * * Define Remote Signaling Points: * SCCP_SSR <ssr_id> RSP <remote_spc> <flags> <pc_mask> SCCP_SSR 1 RSP 2 0 0x0000 * * Define Local Sub-Systems: * SCCP_SSR <ssr_id> LSS <local_ssn> <module_id> <flags> <protocol> SCCP_SSR 2 LSS 0x93 0x2d 0 MAP * * Define Remote Sub-Systems: * SCCP_SSR <ssr_id> RSS <remote_spc> <remote_ssn> <flags> SCCP_SSR 3 RSS 2 0x06 0 * * Define Global Title Pattern * SCCP_GTT_PATTERN <pattern_id> <addr_indicator> <pc> <ssn> <global_title> [<gtai_pattern>] SCCP_GTT_PATTERN 1 0x12 0x0001 0x93 0x001204 12/+ * * Define Global Title Address * SCCP_GTT_ADDRESS <address_id> <addr_indicator> <pc> <ssn> <global_title> [<gtai_replacement>] SCCP_GTT_ADDRESS 1 0x13 0x0010 0x06 0x001204 12-/- * * Add Entry in GTT Table * SCCP_GTT <pattern_id> <mask> <primary_address_id> [<backup_address_id>] SCCP_GTT 1 R-/K 1 * * TCAP Parameters: * TCAP_CONFIG <base_ogdlg_id> <nog_dialogues> <base_icdlg_id> * <nic_dialogues> <options> <dlg_hunt> [<addr_format>] TCAP_CONFIG 0x0 8192 0x8000 8192 0x0000 0 0 * * Uncomment to record TCAP traces (from s7_log) * TCAP_TRACE <op_evt_mask> <ip_evt_mask> <non_prim_mask> *TCAP_TRACE 0x7 0xf 0x0 * * * MAP Parameters: * MAP_CONFIG <options>
Pls help
RGds,
JItesh
Hi Jitesh,
I am also wondering , I am confused about the connectivity to HLR when we fire the ATI query using gsmSCF address and HLR interface. Can we send the ATI query to HLR via STP using SSN in this case are we connected to all the HLRs via one STP??
Please reply ASAP.
Thanks and regards
AJAY PATEL
