Hi all
I've run a project based on ss7hde card.
The E1 input system is that it has 12 LSL links and 8 time slot is depending SGSN (GPRS) . the input is port 1 of card and output from port 2
How can I separate 8 time solt(GPRS) and relay them without going to top of my stack?
Is this possible?
Best Regard
Check Section 3.4.7 of the SS7HD programmer’s manual covers this (if I have understood your requirements correctly).
You simply need to use the STREAM_XCON command in the config.txt file to cross-connect the appropriate timeslots.
http://www.dialogic.com/~/media/manuals/ss7/cd/ProductSpecific/SS7HD/Documentation/SS7HD-PM.pdf#page=40
Syntax:
http://www.dialogic.com/~/media/manuals/ss7/cd/ProductSpecific/SS7G3x/SIUModeUserManual/SS7G3x-SIU-UM.pdf#page=147
hope this helps
.
