Showing related tags and posts across the entire site.
-
Does anyone have any ideas how I can test my program with use of all ports on the DMG when I only have one phone line and one cell phone? I can use my program to phone my cell phone through the DMG and my home land line, but I need to test the ability of the program to work well with the DMG will all...
-
All: Here are the current rule capacities for DMG1000 and DMG2000. – Inbound TDM routing (calls form the TDM side to the IP side) • DMG2000 - Total of a 150 rules • DMG1000 – Total of 40 rules – Inbound VoIP routing (calls form the IP side to the TDM side) • DMG2000 ...
-
A simple way of doing this is to modify the TDM to IP rule that you are using to route calls to the Call Manager. If you look at the rule you will see a section at the bottom called CPID manipulation. In the Called Party Number field you will see a D (which means destination number). Replace the D with...
-
I assume that you have forgotten the password ? You can recover from this by factory resetting the DMG from the serial interface so the password goes back to default (along with the IP address to 10.12.13.14) then change the IP address via the serial interface and finally reload your configuration. Note...