Diva System Release - Version 9.0LIN SU1 (final)
| Build: |
109-82 |
| Created: |
Tue May 19 09:06:48 GMT 2009 |
| Uploaded: |
Tue May 19 09:52:02 GMT 2009 |
| Status: |
final |
| Access: |
free |
Dialogic® Diva® System Release 9.0 LIN SU1 is a service release, which includes support of new Dialogic® Diva® Media Boards, additional features, enhancements of existing features as well as fixes of known bugs.
System Release 9.0 LIN SU1 allows up to 8 Diva Media Boards to be installed on a computer running the Linux operating system distributions SuSE, Red Hat, Debian or generic Linux distributions as 32 or 64 bit variant. It supports unified messaging, voice, speech, conferencing applications, RAS & RRAS (client and server mode), modem and fax as well as Voice over IP (VoIP) and Fax over IP (FoIP).
The new features of System Release 9.0 LIN SU1 are:
- Support of new Diva Media Boards
- Dialogic Diva V-1PRI/E1/T1-30 PCIe HS
- Dialogic Diva V-2PRI/E1/T1-60 PCIe HS
- Dialogic Diva V-4PRI/E1/T1-120 PCIe HS
- chan_capi configuration wizard for Asterisk®
- Automatic generation of a capi.conf file per WEB GUI
- Simplified usage of enhanced DSP features with Asterisk®
- Support of
- 256 ms Echo Cancellation
- Suppression of ambient noises
- Automatic Gain Control
- Digital Gain Control
- Codec Support (Automatic Transcoding) incl. G.729, G.726/32, GSM, iLBC and G.711
- Detection of MF digits and Dialing Pulses Rate conversion (control of recording and playback pitch/speed)
- Detection of special tones and human talker interactive control of voice stream
- Control voice stream while recording or playing back
- Use any available channel command
- Conferencing
- Using proven Diva Media Board Q.SIG and SS7 implementation
- Noise suppression
- Tone clamping
- Automatic Gain Control (Rx, Tx)
- Pitch Control (Rx, Tx) in combination with play/record funcionality on Asterisk
- MF Tone Detection,
- Pulse Dial Detection,
- Transmit SIT Tones,
- Detect SIT Tones,
- Voice Control
- DSP-based DTMF detection,
- DSP-based echo cancellation,
- Chat/Meet Me (Ad Hoc) Conferencing - (MOH).
- Fax Send/Receive
- New Dialogic® Diva® softIP features in Resource Board Mode
- When using Diva Media Boards with full DSPs, support of G.729, G.726/32, GSM, iLBC, G.711
- Clear Channel Fax and Modem supported up to full speed of 33.6kbps (V.34)
- NOTE: The use of G.729 requires the appropriate license from Dialogic
- Dialogic® DSI SS7
- Provide high performance MTP2 on Diva Media Boards
- Run SS7 signaling and media processing on the same Diva Media Board
- Supports up to 16 E1 trunks with up to 496 bearer channels per installation
- Supports up to 4 signaling links and up to 4 linksets
- Supports CAPI interface and Dialogic® DSI SS7 interfaces
- Miscellaneous
- Echo canceller up to 256ms tail length
- Diva Media Boards (with DSP) can be used as transcoding device in parallel to TDM access (e.g. Asterisk® )
- Tested XEN pci passthrough compatibility
- RTCP for SIPcontrol 2.0 SU2
- Interoperability with OCS 2007 R2
- Firmware support of Asymmetric Hold with SIPcontrol (send/receive only)
- Support for kernels up to 2.6.29
Software modules contained in System Release 9.0 LIN SU1
- Dialogic® Diva® SIPcontrol™ 2.0 SU2
- Dialogic® Diva® softIP 2.2 offers CAPI, TTY, Diva API or Dialplan (chan_capi) based applications to interface with SIP peers.
- Dialogic® Diva® Interfaces for support of Dialogic DSI SS7 Software
For more information on software modules please refer to the documentation.
To find out more, please go to Dialogic® Diva® Driver for Linux
This is a released Product.
The Dialogic® Diva® System Release for Linux ("SR") is being provided to you free of charge. However, several of the underlying components of the SR are being licensed or otherwise provided to you under certain terms and conditions that are listed below and that you must accept prior to usage of any of the respective components.
Dialogic® Diva® softSS7™
To operate or otherwise utilize the Diva softSS7 component of the SR, you must (a) purchase the applicable license from a Dialogic authorized distributor for your particular geographic region, and (b) agree to be bound by the terms and conditions of the Dialogic license agreement(s) shipped with the Diva softSS7 component of the SR.
Dialogic® Diva® softIP™
To operate or otherwise utilize the Diva softIP component of the SR, you must (a) purchase the applicable license from a Dialogic authorized distributor for your particular geographic region, and (b) agree to be bound by the terms and conditions of the Dialogic license agreement(s) shipped with the Diva softIP component of the SR.
Dialogic® Diva® SIPcontrol™
The Diva SIPcontrol component of the SR is available to you at no cost for up to two (2) channel licenses. If more than two (2) channel licenses are required, license packs can be obtained by contacting a Dialogic authorized distributor for your particular geographic region, and which are subject to Dialogic's license agreement(s) shipped with the Diva SIPcontrol product license pack(s).
Dialogic® SR Base Driver
The SR Base Driver component of the SR is available to you at no cost and is distributed, with the exception of the Diva® SDK, under the GNU General Public License (see http://www.gnu.org/licenses/gpl.html). The Diva SDK is property of Dialogic Corporation. Usage parameters for the Diva SDK are denoted in seperate licenses available at http://www.dialogic.com/ and that must be agreed to by you respectively prior to operating or otherwise utilizing the respective component.
For a complete list of Dialogic authorized distributors from which you can obtain the applicable license(s) for additional board features, Diva softSS7, Diva softIP and Diva SIPcontrol, please visit http://www.dialogic.com/purchase.htm or check with your local Dialogic sales representative.
This software comes in packages.
Select the appropriate download from the following list:
|