Products
ShareDialogic® Digital Network Interface Boards
Dialogic® HMP Interface Boards enable all the flexibility of host-based media resources (scalable and licensed in single-unit increments) to mate with the network interface, providing developers and system integrators with a new level of configuration flexibility and cost efficiency. This is a departure from traditional media span products that require onboard digital signal processors (DSPs) to provide media and audio transcoding resources, which creates fixed costs and often fixed or limited configurations of media to complement the network interface density.| Features and Benefits | |
| Interface to Dialogic® Host Media Processing Software Release 2.0(PCI boards only) and 3.0 for Windows and 3.1 for Linux resources | Host-based voice, speech, conference, fax, and IP transcoding are accessible from the PSTN interface and can be configured in a wide range of densities, scalable in individual port increments |
| One, two,four and eight digital network interfaces | Four different densities support a cost-effective range of solution sets |
| Software-selectable trunks to configure the board to be either T-1 or E-1 | Reduces the total cost of ownership by increasing flexibility, reducing inventory, and simplifying the purchasing process and test effort |
| Selection of PSTN protocols | Support for a wide range of PSTN protocols including ISDN and CAS signaling |
| Provides the ability to mix select protocols on each span | Maximizes slot efficiency and reduces total cost of ownership in environments where there are multiple protocols (e.g., call centers) |
| Product Highlights | |
| Form factor | PCI for DNI/300TEPHMP, DNI/601TEPHMP and DNI/1200TEPHMP |
| Resource bus | H.100 CT Bus |
| Ports | 24/30, 48/60, 96/120 or 192/240 T-1/E-1 Channels |
| Operating systems | Linux, Windows XP, Windows Server 2003, please refer to the Dialogic® Host Media Processing Software Release Updates for latest information on which model board is supported under which OS and software release |
| Digital interfaces | One, two, four or eight T-1/E-1 |
| Max. boards/system | 4 for DNI/300TEPHMP, DNI/601TEPHMP, DNI/1200TEPHMP, DNI/310TEPEHMP, DNI/610TEPEHMP and DNI/1210TEPEHMP |
| Control processor | Intel XScale® technology, 80200 @ 600 MHz |
| Control processor memory | 48 MB DRAM |
| Baseboard global memory | 16 MB DRAM accessible to all signal processors and control processor |
| Product | Order Code | Description |
| DNI300TEPHMPW | 884-147 | Single T-1/E-1 |
| DNI601TEPHMPW | 884-146 | Dual T-1/E-1 with on board tone, G.168 echo cancellation and call progress analysis |
| DNI1200TEPHMPW | 884-148 | Quad T-1/E-1 |
| DNI300TEPHMPWJ | 888-885 | Single T-1/E-1; JATE approved for Japan |
| DNI601TEPHMPWJ | 888-884 | Dual T-1/E-1 with on board tone, G.168 echo cancellation and call progress analysis; JATE approved for Japan |
| DNI1200TEPHMPWJ | 888-878 | Quad T-1/E-1; JATE approved for Japan |
| DNI2410TEPEHMPQ | 306-328 | Octal T-1/E-1 PCIe with on board G.168 echo cancellation |
| DNI310TEPEHMPQ | 310-881 | Single T-1/E-1 PCIe with on board G.168 echo cancellation |
| DNI610TEPEHMPQ | 310-880 | Dual T-1/E-1 PCIe with on board G.168 echo cancellation |
| DNI1210TEPEHMPQ | 310-882 | Quad T-1/E-1 PCIe with on board G.168 echo cancellation |