Note! Windows NT 4.0 does not support USB.

Installing Diva 850 ISDN TA under Windows NT 4.0 (ServicePack 5.0)

Usually, Windows NT 4.0 does not install the ISDN adapter automatically. You have the option of either using the Eicon Installation Guide to do this, or you can install it manually from the Control Panel.

Adding your ISDN adapter manually from the Control Panel

1) Select Start in the tool bar

2) Select Control Panel

3) Double click the icon Modems

4) Click Add

5) Select Don't detect my modem. I'll select it from a list

6) Click Next

7) Select Have Disk, and select the CD-ROM drive where the scripts are located .

8) Select Diva 850 ISDN TA PnP and click Next.

9) Finally choose the COM-port. Accept what Windows has proposes, choose OK

10) Click Finish and a new dialog appears. This dialog should say that your adapter has been installed.

Top