- Home
- Service Center
- Manuals
- Downloads
- Helpweb
- Dialogic API information
- Find a Dialogic API
- DM3 & JCT Media Boards
- Host Media Processing (HMP)
- Global Call API Technotes
- Brooktrout Fax
- IP Media Server
- CSP / MSP / IMG
- DMG-series Media Gateways
- Signaling products
- Multimedia Platform for ATCA
- Diva Media Boards
- Diva SDK
- Vision™ and NaturalAccess™ products
- Diva Client
- Eiconcards (X.25)
- Other products
- Training
- Contact
Dialogic Support Helpweb
ADSL products
IMPORTANT NOTE: THIS IS AN END OF LIFE PRODUCT.
No downloads are available for this product.
The information in the Helpweb is not maintained or updated, but is provided as an
aid to customers who are still using the product.
Setting ADSL parameters
Note: If the Diva ADSL modem is supplied by the ADSL provider, the parameters will have been pre-configured and this step is not normally necessary.
If the Diva ADSL has been acquired independently, then the parameters supplied by the ADSL provider you intend to use will need to be input here.
See also: Parameter settings for known ADSL providers
The ADSL parameters can be set using the Diva ADSL Configure utility.
Step 1:
- Click Start > Programs > Eicon Diva ADSL USB > Configure
- The following screen will appear:
- Click on 'Settings'
Step 2:
The ADSL parameter settings screen will now appear:
- Enter the two figures for the VPI and VCI settings
- Select the closest match for the name of the encapsulation method used by
your ADSL supplier. There are only two types:
- 'LLC'
- 'Null' - also known as 'VC Multiplexed'
- Select 'Multimode' and 'Auto-Modulation' and the modem will 'auto-discover' these values.
Tuning Tip: If you do know your particular modulation setting, then select it at this point as it will make the synchronisation procedure slightly faster since the auto-discovery process will be over-ridden.
See also: Connecting to the Internet
