S90, S91, and S94 Eiconcard Installation
Note: The following cards require the use of the drivers contained in
the Eicon 'Connections for Windows 2000' CD available separately from the
Eiconcard:
- C30
- C31
- C90
- C91
- CX1
- S92
- S94 8MB (Part number - 310-208-03)
The following installation was carried out using an S91 card.
(Note: This installation procedure also applies to C20 and C21 cards)
The S91 card will appear as a 'Network Adapter' entry in Device Manager.
Using the WAN Services Configuration Program
Start the Eiconcard configuration program by any of the following methods:
- Running ECADMIN at a command prompt (use full path of <drive:>\winnt\system32\eicon)
- From Start > Programs > Eicon > Eicon Cards > Eicon
Configuration Program
- From the 'Advanced Properties' of the Eiconcard in Device Manager
After loading you will see:
Step 2. Configure the Eiconcard adapter options according to your requirements.
Then click on a card icon to show high level protocols and ports.
Step 3. Configure the high level protocols as required.
NOTE: Generally these values should not be modified unless your specific
application gives instructions to do so.
Step 4. Configure each of the ports as required.
Step 5. After finishing configuring all the ports, select the "Save"
option form the File menu and then "Exit" to complete the Core
Services Configuration.
Share