- Home
- Services & Support
- Downloads
- Helpweb
- Dialogic API information
- Find a Dialogic API
- DM3 & JCT Media Boards
- Host Media Processing (HMP)
- Global Call API
- Brooktrout Fax
- IP Media Server
- CSP / MSP / IMG
- DMG-series Media Gateways
- Signaling products
- Global Call API
- Multimedia Platform for ATCA
- Diva Media Boards
- Diva SDK
- Diva Client
- Eiconcards (X.25)
- Other products
- Online Training
- Manuals
- Contact
Dialogic Support Helpweb
Diva Client products
MSN configuration in Windows 2000/XP
If there are multiple applications that will receive incoming calls to a Diva Client card, you can configure Multiple Subscriber Numbering (MSN)
to ensure that each application receives calls intended for it.
For example, the RAS service may be receiving calls through
the WAN Miniport service for network access, and there may be a CAPI or COM Port-based application which has to receive faxes.
The card therefore needs to be configured so that it can receive calls for both services and direct them to the two applications.
In order to differentiate which application or service answers which incoming calls, assign a different phone number on your ISDN line to each service.
Configure MSN for RAS / Incoming Connections
Configure MSN for COM Ports
Configure MSN for CAPI
Configure MSN for RAS / Incoming Connections
To configure MSN for RAS or Incoming Connections, you must go to the Diva Client Configuration of the Diva Client card, in order to configure the WAN Miniport service.
Go to Start -> Programs -> Diva Client for Windows -> Diva Client Configuration.
Enter the MSN numbers that you wish Dial-up Networking to answer on and click Apply.
The Wan Miniport will now answer incoming calls to the specified numbers.
TOPConfigure MSN for COM Ports
Step 1.
- Install the virtual modem of your choice, for example Eicon ISDN Digital Modem (64k).
Step 2.
- Navigate to the properties of the modem (Control Panel > Phone and Modems) and click on the 'Advanced' tab.
- Then add the following:
at+ia123456 (where '123456' is the MSN you want assigned to the virtual modem)
The modem will now answer incoming calls to this number
Note:
- If you want a particular MSN to be used for outgoing calls, you can configure them as well by using the command:
- The Diva ISDN Analog FaxModem on Passive Diva Client Cards cannot be configured to use a MSN number using AT commands.
at+io123456 (where 123456 is the MSN)
TOPConfigure MSN for CAPI
MSN Configuration for CAPI must be done in the specific CAPI application that you are going to use.
Consult your application documentation on how to assign MSN numbers.
TOP
