Dialogic Service Center

Service Contracts

Technical Helpweb

Downloads

Contact Support

Developer Forums

Training

Service Center Logon

Popular pages

Diva Downloads

Product pages

Contact Dialogic Support

Other downloads

Useful links

 

Technical Helpweb

Dialogic® Diva® Client products

Line Type

Configuring your Diva Client Card according to your ISDN Line Type

You can set the following parameters under the properties of the device in Device manager.

Basic Rate, direct connection to Telco via NT1 wall-socket, point to multi-point connection
(This means that you are able to have multiple ISDN devices on the line)
Also known as 'Standard', 'S-mode', and also 'Mehrgeraeteanschluss'
  • TEI = Automatic
  • Connect mode = No disc
  • Direct Dial In (NT2) = OFF

Basic Rate, connected to local PABX, with a point to point connection
(This means that you are not able to have multiple ISDN devices on the line)
Connected via wall socket to private exchange (PABX)
  • TEI = 0
  • Connect mode = No disc
  • Direct Dial In (NT2) = ON

Basic Rate, directly connected to Telco via NT1 wall-socket, point to point connection
(This means that you are not able to have multiple ISDN devices on the line)
Also known as 'T-mode', or 'Anlagenanschluss'
  • TEI = 0
  • Connect mode = No disc
  • Direct Dial In (NT2) = ON

Basic Rate, connected to local PABX, with a point to multi-point connection
(This means that you are able to have multiple ISDN devices on the line)
Connected via wall socket to private exchange (PABX)
  • TEI = Automatic
  • Connect mode = No disc
  • Direct Dial In (NT2) = OFF

Go to the following page for instructions about Configuring the Line Properties




Feedback

Please rate the usefulness of this page:  
0 - not useful at all
1 - potentially useful
2 - quite useful
3 - very useful
4 - exactly the information I needed     

Please enter a comment about this page: