Provisioning an Analog Line in North America
Note: this page is taken from the Installation Manual, which is available for download.
This page will assist you in ordering an analog line for your analog Dialogic® Diva® Media Board.
Line Types
Diva Analog Media Boards can be configured to support a standard analog liine. Specify the following requirements when you place your order:
- Standard analog line
- Loop start line
- Dial type: Diva Analog Media Boards support tone and pulse dialing. It is recommended to specify tone as the dial type.
Connecting to a PBX
In most installations, the analog line is connected to a PBX instead of the Diva Analog Media Board. If this is the case and you wish to do DTMF collection through the PBX, you need to configure the sequence on the PBX as follows:
- Ring voltage
- 500 ms pause
- Routing through DTMF
- 500 ms pause
- Open the call path
See also:Line ordering Diva Media Board North America
Information specific for North American users
First published: 01-Feb-2011
Last published: 30-Sep-2011
Open access: Product rule: ; Page rule: Auto