|
iKeys are identity tokens that can be used with Eicon VPN Clients for source
authentication. This guide describes how you configure a Master iKey and, once
this iKey is configured, how you configure one or more User iKeys. The iKey
Manager program is used when configuring both types of iKeys.
Note: With the iKey Manager you may later reset any
iKey by inserting it in a USB port, right-clicking on the desired icon, and
selecting 'Reset iKey'.
Important: If you reset the Master iKey, you will disable management
of any User iKey configured with that particular Master iKey - unless you have
created a copy.
-
Safepipe must be installed.
-
The iKey Manager software must be installed
on the administrator's workstation.
-
The administrator's workstation must be equipped with more than one USB
port.
If you are going to configure several User iKeys, you
may wish to use a USB hub to facilitate the task.
- In Safepipe's Client section, token files (configuration files) must be
created for each iKey user, and the 'Hard Token' box must be checked in the
same section.
All token files must be configured on Safepipe with identical
temporary keys. Otherwise, there will be a conflict with the Master iKey.
|
