Transmit Signaling Configure 0x0014

SwitchKit Name

TransmitSignalingConfig

Type

EXS API and SwitchKit API message

Description

Transmit Signaling Configure 0x0014

This message is used to define the signaling transmitted by the CSP for non-standard trunk or line interfaces.

NOTE: Do not use this message without first contacting Cantata Technical Support.

Sent by

Host

SwitchKit Code

Configuration

TransmitSignalingConfig (

Node = integer,

Range = StartSpan:StartChan - EndSpan:EndChan,

SignallingType = integer,

SignallingValue = integer,

TransmissionMode = integer);

C Structure

typedef struct {

unsigned short StartSpan;

UBYTE StartChannel;

unsigned short EndSpan;

UBYTE EndChannel;

UBYTE SignallingType;

UBYTE SignallingValue;

UBYTE TransmissionMode;

} XL_TransmitSignalingConfig;

C++ Class

class XLC_TransmitSignalingConfig : public XLC_ChanRangeMessage {

public:

unsigned short getStartSpan() const;

void setStartSpan(unsigned short x);

UBYTE getStartChannel() const;

void setStartChannel(UBYTE x);

unsigned short getEndSpan() const;

void setEndSpan(unsigned short x);

UBYTE getEndChannel() const;

void setEndChannel(UBYTE x);

UBYTE getSignallingType() const;

void setSignallingType(UBYTE x);

UBYTE getSignallingValue() const;

void setSignallingValue(UBYTE x);

UBYTE getTransmissionMode() const;

void setTransmissionMode(UBYTE x);

};

EXS API Hex Format

Example—Invert E&M Wink Start Signaling

This example shows the message sequence sent to invert the default E&M Wink Start transmit signaling on a channel. The default E&M signaling values are: on-hook: A = 0, B = 0; all other signaling: A = 1, B = 1.

A separate message must be sent to change each signaling type.