Inseize Instruction List Configure 0x0029

SwitchKit Name

InseizeInstrListConfig

Type

EXS API and SwitchKit API message

Description

Inseize Instruction List Configure 0x0029

Use several of these messages to form a list of configuration instruction for inseize control. You must send a separate Inseize Instruction List Configure message for each instruction that you add to the list.

After configuring a channel with an inseize instruction list, the CSP executes the list upon detecting an inseizure on the channel.

The last instruction in a list should always be "Wait For Host Control" or "Wait for Host Control with Answer Supervision," where the CSP waits for further instructions from the host to continue processing.

NOTE: A seize instruction cannot be preprogrammed.

T-ONE Card

When performing Immediate Start on E&M trunks on a T-ONE card, the first inseize instruction must be Generate Inseize ACK.

Related Messages

• Inseize Control 0x002B (InseizeControl)

• Call Control Instructions Query 0x0087 (CallControlInstructionQuery)

Sent by

Host

Example Message

The following example message is sent from the host to the CSP to configure an Inseize instruction list on spans 0, 1, 2, 3 - channels 0-23.

00 15 00 29 00 00 ff 01 02 0d 03 00 00 00 0d 03 00 03 17 ff 00 00 00

Clear Instruction List

00 15 00 29 00 00 ff 01 02 0d 03 00 00 00 0d 03 00 03 17 01 07 00 00

Generate Inseize Acknowledgment

00 15 00 29 00 00 ff 01 02 0d 03 00 00 00 0d 03 00 03 17 02 03 01 00

Receive Stage 1 Digits

00 15 00 29 00 00 ff 01 02 0d 03 00 00 00 0d 03 00 03 17 03 02 04 00

Generate Call Processing Event (Wink 2)

00 15 00 29 00 00 ff 01 02 0d 03 00 00 00 0d 03 00 03 17 04 06 00 00

Report Incoming Call With Address Data

00 15 00 29 00 00 ff 01 02 0d 03 00 00 00 0d 03 00 03 17 05 04 00 00

Wait For Host Control

SwitchKit Code

Configuration

InseizeInstrListConfig (

Node = integer,

Range = StartSpan:StartChan - EndSpan:EndChan,

InstrNum = integer,

InstrType = integer,

InstrData1 = integer,

InstrData2 = integer);

C Structure

typedef struct {

unsigned short StartSpan;

UBYTE StartChannel;

unsigned short EndSpan;

UBYTE EndChannel;

UBYTE InstrNum;

UBYTE InstrType;

UBYTE InstrData1;

UBYTE InstrData2;

} XL_InseizeInstrListConfig;

C++ Class

class XLC_InseizeInstrListConfig : public XLC_ChanRangeMessage {

public:

unsigned short getStartSpan() const;

void setStartSpan(unsigned short x);

UBYTE getStartChannel() const;

void setStartChannel(UBYTE x);

unsigned short getEndSpan() const;

void setEndSpan(unsigned short x);

UBYTE getEndChannel() const;

void setEndChannel(UBYTE x);

UBYTE getInstrNum() const;

void setInstrNum(UBYTE x);

UBYTE getInstrType() const;

void setInstrType(UBYTE x);

UBYTE getInstrData1() const;

void setInstrData1(UBYTE x);

UBYTE getInstrData2() const;

void setInstrData2(UBYTE x);

};

EXS API Hex Format

Instruction Type Data