PPL Event Indication 0x0043

SwitchKit Name

PPLEventIndication

Type

EXS API and SwitchKit API message

Description

PPL Event Indication 0x0043

This message is sent by a PPL component to report an event to the host with optional ICB data.

NOTE: All PPL Event Indication messages that originate with the CIC PPL component will have the new Virtual CIC AIB.

Sent by

CSP

Example Message (Socket Log Output for SwitchKit)

In this example, the CSP informs the host of an incoming
SIP REGISTER message:

00 0B 00 43 00 00 FF 7F 00 A7 00 0A 00

SwitchKit Code

C Structure

typedef struct {

UBYTE AddrInfo[30];

unsigned short ComponentID;

unsigned short PPLEvent;

UBYTE ICBCount;

UBYTE Data[218];

} XL_PPLEventIndication;

C++ Class

class XLC_PPLEventIndication : public XLC_InboundMessage {

public:

const UBYTE *getAddrInfo() const;

UBYTE *getAddrInfo();

void setAddrInfo(UBYTE *x);

XBYTE getSpan() const;

void setSpan(XBYTE x);

UBYTE getChannel() const;

void setChannel(UBYTE x);

UBYTE getStackID() const;

void setStackID(UBYTE x);

UBYTE getLinkID() const;

void setLinkID(UBYTE x)

XBYTE getV5ID() const;

void setV5ID(XBYTE x);

unsigned short getComponentID() const;

void setComponentID(unsigned short x);

unsigned short getPPLEvent() const;

void setPPLEvent(unsigned short x);

UBYTE getICBCount() const;

void setICBCount(UBYTE x);

const UBYTE *getData() const;

UBYTE *getData();

void setData(UBYTE *x);

};

EXS API Hex Format

Data

For SS7 MTP Message Tracing:

ICB Data Length n (variable)

Data [0] First byte of MSU Data

Data [n] End of MSU Data

NOTE: If ICB length is more than 200 bytes the following applies. For example: ICB Data Length is 450 bytes:

a. Then the first frame will be sent with the first 200 bytes of MSU Data with PPL Event Indication as
0x20: "SS7 MTP Message Tracing Not Last".

b. The second frame will be sent with the next 200 bytes of MSU Data with PPL Event Indication as
0x20: "MTP Message Tracing Not Last".

c. The third frame will be sent with the next 50 bytes of MSU Data with PPL Event Indication as
0x21: "MTP Message Tracing Last".

The length and content of the data varies according to the ICB subtype. A list of valid ICBs appears in the ICB chapter.

Response Status

If the MSB of the Status field is 0x50 (NACK), the LSB indicates the NACK reason.

0x01 Invalid module type for DPC/Stack/CICcombination.

Example: Host has sent a Service State Configure message with invalid DPC/Stack/CIC.

0x02 Message received for unassigned CIC.

Example: Host has sent a PPL Event Request for unassigned CIC.

0x03 Only Extended API is supported for VCIC.