T1 Span Configure 0x00A9

SwitchKit Name

T1SpanConfig

Type

EXS API and SwitchKit API message

Description

T1 Span Configure 0x00A9

This message is used to configure the characteristics of a T1 span.

NOTE: Before changing span configuration, Cantata ALWAYS RECOMMENDS that you de-assign the spans, assign them again and then send the new span configuration.

Sent by

Host

Example Message (Socket Log Output for SwitchKit)

The following socket log output/example message shows a T1 Span being configured with D4 framing and a line coding method of bit 7 zero suppression. The line length is 0-133 feet.

00 0D 00 A9 00 00 FF 00 01 0C 02 01 23 09 06

SwitchKit Code

Configuration

T1SpanConfig (

Node = integer,

Span = integer,

Format1 = integer,

Format2 = integer);

NOTE: In SwitchKit, the parameter Format1 is the same as Format in EXS API. In SwitchKit, the parameter Format2 is the same as Line Length in EXS API.

C Structure

typedef struct {

unsigned short Span;

UBYTE Format1;

UBYTE Format2;

} XL_T1SpanConfig;

C++ Class

class XLC_T1SpanConfig : public XLC_SpanMessage {

public:

unsigned short getSpan() const;

void setSpan(unsigned short x);

UBYTE getFormat1() const;

void setFormat1(UBYTE x);

UBYTE getFormat2() const;

void setFormat2(UBYTE x);

};

EXS API Hex Format