PPL Transmit Signal Configure 0x00D2

SwitchKit Name

PPLTransmitSignalConfig

Type

EXS API and SwitchKit API message

Description

PPL Transmit Signal Configure 0x00D2

This message allows the host to configure transmit line signaling on channels with a trunk type of PPL.

The idle signal is used by the internal out-of-service protocol to transmit idle code when transitioning to the primary protocol. The out-of-service signal is used when transitioning to the out-of-service protocol.

Sent by

Host

SwitchKit Code

Configuration

PPLTransmitSignalConfig (

Node = integer,

StartSpan = integer,

StartChannel = integer,

EndSpan = integer,

Range = StartSpan:StartChan - EndSpan:EndChan,

EndChannel = integer,

ComponentID = integer,

ProtocolSignalingState = integer,

SignalingBits = integer);

C Structure

typedef struct {

unsigned short StartSpan;

UBYTE StartChannel;

unsigned short EndSpan;

UBYTE EndChannel;

unsigned short ComponentID;

UBYTE ProtocolSignalingState;

UBYTE SignalingBits;

} XL_PPLTransmitSignalConfig;

C++ Class

class XLC_PPLTransmitSignalConfig : public XLC_OutboundMessage {

public:

unsigned short getStartSpan() const;

void setStartSpan(unsigned short x);

UBYTE getStartChannel() const;

void setStartChannel(UBYTE x);

unsigned short getEndSpan() const;

void setEndSpan(unsigned short x);

UBYTE getEndChannel() const;

void setEndChannel(UBYTE x);

unsigned short getComponentID() const;

void setComponentID(unsigned short x);

UBYTE getProtocolSignalingState() const;

void setProtocolSignalingState(UBYTE x);

UBYTE getSignalingBits() const;

void setSignalingBits(UBYTE x);

};

EXS API Hex Format

NOTE: There are no default parameters for the E-ONE, T-ONE, or J-ONE line cards.