IP Signaling Series 3 Card Configure 0x0100

SwitchKit Name

ServerConfig

Type

EXS API and SwitchKit API message

Description

IP Signaling Series 3 Card Configure 0x0100

This message is used to inform the IP Signaling Series 3 card about a Matrix Controller. It sets up all of the information on the IP Signaling Series 3 card side that allows for the connection to the Matrix Controller.

When an alarm.log file is created for this message, the logical node ID, 0xFE, is not shown in the log. Instead, this message shows an API logical node ID in the alarm.log.

Sent by

Host

SwitchKit Code

The syntax for the IP Signaling Series 3 Card Configure message corresponds to the fields of the ServerConfig message.

C Structure

typedef struct {

UBYTE AddrInfo[4];

unsigned short ExpandedNode;

UBYTE reserved23[2];

unsigned short ObjectType;

unsigned short ObjectInstanceID;

UBYTE reserved29[68];

UBYTE TLVCount;

UBYTE TLVData[172];

} XL_ServerConfig;

C Structure Response

typedef struct {

unsigned short Status;

UBYTE reserved6[11];

UBYTE AddrInfo[4];

unsigned short ExpandedNode;

UBYTE reserved23[2];

unsigned short ObjectType;

unsigned short ObjectInstanceID;

UBYTE reserved29[241];

} XL_ServerConfigAck;

C++ Class

class XLC_ServerConfig : public XLC_OutboundMessage {

public:

const UBYTE *getAddrInfo() const;

UBYTE *getAddrInfo();

void setAddrInfo(UBYTE *x);

unsigned short getExpandedNode() const;

void setExpandedNode(unsigned short x);

unsigned short getObjectType() const;

void setObjectType(unsigned short x);

unsigned short getObjectInstanceID() const;

void setObjectInstanceID(unsigned short x);

UBYTE getTLVCount() const ;

void setTLVCount(UBYTE x);

const UBYTE *getTLVData() const;

UBYTE *getTLVData();

void setTLVData(UBYTE *x);

};

C++ Class Response

class XLC_ServerConfigAck : public

XLC_AcknowledgeMessage {

public:

unsigned short getStatus() const;

void setStatus(unsigned short x);

const UBYTE *getAddrInfo() const;

UBYTE *getAddrInfo();

void setAddrInfo(UBYTE *x);

unsigned short getExpandedNode() const;

void setExpandedNode(unsigned short x);

unsigned short getObjectType() const;

void setObjectType(unsigned short x);

unsigned short getObjectInstanceID() const;

void setObjectInstanceID(unsigned short x);

};

EXS Hex API Format