You are here: CSP Developer’s Guide: Overview > 9 Configuring the DSP-ONE Card > Configuring a Sample Pattern ID
Configuring a Sample Pattern ID
Overview
The following example shows how to configure Pattern ID 0x17 to receive a three-second, 400 Hz tone. To perform this task, the host sends three API messages as follows:
1. Tone Configure message to replace the default tone (Tone ID 0x0F, 425 Hz) with the new, 400 Hz tone.
2. CPA Pattern Configure message - create the new Pattern ID 0x17.
3. CPA Class Configure message - add Pattern 0x17 to class 0x00.
Table 9-21 First Message: Tone Configure
|
Byte |
Field Description |
|
0 |
Message Frame 0xFE |
|
1, 2 |
Length (2 bytes) 0x0011 |
|
3, 4 |
Message Type (2 bytes) 0x0031 |
|
5 |
Reserved 0x00 |
|
6 |
Sequence Number |
|
7 |
Logical Node ID 0xFF |
|
8 |
Update All Flag 0x01 |
|
9 |
Reserved 0x00 |
|
10 |
Tone Type 0x06 |
|
11 |
Action 0x01 |
|
12 |
Data[0] Tone ID being changed 0x0F |
|
13 |
Data[1] Reserved 0x00 |
|
14 |
Data[2] Number of frequencies in tone 0x01 |
|
15 |
Data[3] Reserved 0x00 |
|
16 |
Data[4] Frequency Value[0], Hz, MSB 0x01 |
|
17 |
Data[5] Frequency Value[0], Hz, LSB 0x90 |
|
18 |
Data[6] Reserved 0x00 |
|
19 |
Data[7] Reserved 0x00 |
|
20 |
Checksum |
Table 9-22 Second Message: Call Progress Analysis Pattern Configure
|
Byte |
Field Description |
|
0 |
Message Frame 0xFE |
|
1, 2 |
Length (2 bytes) 0x0016 |
|
3, 4 |
Message Type (2 bytes) 0x00B2 |
|
5 |
Reserved 0x00 |
|
6 |
Sequence Number |
|
7 |
Logical Node ID 0xFF |
|
8 |
Update All Flag 0x01 |
|
9 |
Pattern ID 0x17 |
|
10 |
Action: Add/Replace Pattern 0x01 |
|
11 |
Data[0] Pattern ID to report on detection 0x17 |
|
12 |
Data[1] Tone Group ID 0x00 |
|
13 |
Data[2] Pattern Configuration 0x01 |
|
14 |
Data[3] CPA Report on Pattern Loss 0x17 |
|
15 |
Data[4] Interval Cycles to Match 0x01 |
|
16 |
Data[5] Interval Cycles to Report 0x01 |
|
17 |
Data[6] Reserved 0x00 |
|
18 |
Data[7] Interval Descriptor Count 0x01 |
|
19 |
Data[8] Tone ID 0x0F |
|
20 |
Data[9] Reserved 0x00 |
|
21 |
Data[10] Minimum filter (in 10 ms units) MSB 0x00 |
|
22 |
Data[11] Minimum filter (in 10 ms units) LSB 0x50 |
|
23 |
Data[12] Maximum filter (in 10 ms units) MSB 0x00 |
|
24 |
Data[13] Maximum filter (in 10 ms units) LSB 0x00 |
|
25 |
Checksum |
Table 9-23 Third Message: Call Progress Analysis Class Configure
|
Byte |
Field Description |
|
0 |
Message Frame 0xFE |
|
1, 2 |
Length (2 bytes) 0x0009 |
|
3, 4 |
Message Type (2 bytes) 0x00B3 |
|
5 |
Reserved 0x00 |
|
6 |
Sequence Number |
|
7 |
Logical Node ID 0xFF |
|
8 |
Update All Flag 0x01 |
|
9 |
Class ID 0x00 |
|
10 |
Action 0x01 |
|
11 |
Data[0] Pattern ID 0x17 |
|
12 |
Checksum |