FCI Override (Forward Call Indicators)

Description:

Use this pane to configure the IMG to override various Forward Call Indicators parameters with specified values.

Forward Call Indicators contain information relating to the characteristics of the connection, signaling path and called party sent in the forward direction. This is a mandatory parameter in IAM messages, which is used in countries that offer CUG (closed user group) service.

The FCI Override is enabled by selecting Override in the Forward Call Indicator field, and then select values for each parameter.

 

Related Topics:

Configuring FCI Override

 

Accessing this Pane:

Dialogic IMG EMS -> Routing Configuration -> Channel Groups -> Channel Group (SS7) -> ISUP Group -> FCI Override

SC_Tree_FCI_Override.png

 

Maximum Objects:

1 per ISUP Group

 

ClientView Pane:

SC_FCI_Overrride_Ignore.png

 

 

Field Descriptions:

* If FCI Override is set to enabled the parameters marked with a * below are the default values selected in the FCI Override Pane and will be available in the outbound IAM message.

 

Forward Call indicator:

Ignore (Default) - FCI Override is disabled and the IMG propagates the ISUP information it receives (or the default if no value received)  

Override - Values in FCI parameters will be overridden by values selected in corresponding field below.

 

National/International call indicator:

National * - Change the National/International call indicators on the outbound ISUP IAM message to indicate the call is a national call

International - Change the National/International call indicators on outbound ISUP IAM message to indicate the call is an international call

 

End-to-end Method Indicator:

No end-to-end method available*  - Change the end to end Method Indicator on the outbound ISUP IAM message to 'No end to end Method Indicator available'

pass along method available - Change the end to end Method Indicator on the outbound ISUP IAM message to 'pass-along method available'

SCCP method available - Change the end to end Method Indicator on the outbound ISUP IAM messageto 'SCCP method available'

pass-along and SCCP methods available - Change the end to end Method Indicator on the outbound ISUP IAM message to include both the 'pass-along' and 'SCCP method available'

 

Interworking Indicator:

No interworking encountered* - Change the Interworking Indicator in the outbound ISUP IAM message to 'No interworking encountered'.

interworking encountered - Change the Interworking Indicator in the outbound ISUP IAM message to 'Interworking encountered'.

 

Information Indicator:

No end-to-end information available* - Change the end to end information indicator on the outbound ISUP IAM message to No end-to-end information will available.

end-to-end information available - Change the end to end information indicator on the outbound ISUP IAM message to allow end-to-end information to be available.

 

ISUP Indicator:

ISUP not used all the way* - Change the ISUP Indicator information on the outbound ISUP IAM message to 'ISUP not used all the way'

ISUP used all the way - Change the ISUP Indicator information on the outbound ISUP IAM message to 'ISUP used all the way'

 

ISUP preference Indicator:

ISUP preferred all the way*  - Change the ISUP preference indicator on the outbound ISUP IAM message to 'ISUP preferred all the way'.

ISUP not required all the way - Change the ISUP preference indicator on the outbound ISUP IAM message to 'ISUP not required all the way'.

ISUP required all the way - Change the ISUP preference indicator on the outbound ISUP IAM message to 'ISUP required all the way'.

 

ISDN Access Indicator:

originating access non-ISDN* - Change the ISDN Access indicator on the outbound ISUP IAM message to 'originating access non-ISDN'.

originating access ISDN - Change the ISDN Access indicator on the outbound ISUP IAM message to 'originating access ISDN'.

 

SCCP Method Indicator:

No indication* - Change the SCCP Method Indicator on the outbound ISUP IAM message to no indication on outbound IAM message.

connectionless method available - Change the SCCP Method Indicator on the outbound ISUP IAM message to 'connectionless method available'.

connection oriented method available - Change the SCCP Method Indicator on the outbound ISUP IAM message to 'connection oriented method available'.

connectionless and connection oriented method available - Change the SCCP Method Indicator on the outbound ISUP IAM message to both 'connection oriented method available' and 'connectionless method available'.

 

 

© Copyright 2009 Dialogic Corporation. All rights reserved.