Creating a Channel Group

  1. Right-click Routing Configuration and select New Channel Groups.

  2. Right-click Channel Groups and select New Channel Group. Click on following pop-up Channel Group to display the Channel Group Pane appears pane appears.

    sc_tree_channel_group.png
     

  3. In the Name field, enter a name for the channel group.

  4. The ID field is automatically populated with the next available ID. You can change it if you want.

  5. In the Channel Group Function field, select Incoming Trunks, Outgoing Trunks or Incoming/Outgoing Trunks

  6. In the Signaling Type field, select the signaling type.

  7. Select other fields as required. See the Channel Group pane reference for a description of each field

Note: Do not select a Route Table in the Route Table field at this point. After you configure Route Tables, (see Creating Routing Tables) you come back to the Channel Group pane and associate a Route Table with the channel group.