Configuring H.323 Routing

 

Creating an H.323 Channel Group

  1. Right-click Routing Configuration and select New Channel Groups. Skip this step if an H.323 Channel Group has already been created.

  2. Right-click Channel Groups and select New Channel Group. Click on the following link to display the H.323 Channel Group Pane: H.323 Channel Group

  3. Enter the Name and ID of this channel group.

  4. In the Channel Group Function field, select Incoming Trunks, Outgoing Trunks or Incoming/Outgoing Trunks.

  5. In the Signaling Type field, select H.323.

  6. Select an Incoming IP Profile and an Outgoing IP Profile for this channel group.

  7. Select other fields as required. See the Channel Group GUI Reference for detailed field descriptions.

 

Note: Do not select a Route Table in the Route Table field at this point. The route table must first be created. Once the route table is configured then it will be added to the Channel Group Pane. At that point you can add it to your H.323 Channel Group Pane. (See Creating Routing Tables)

 

Assigning a Channel Group to an IP Network Element

Once the Channel group is created, it can be assigned to a specific H.323 endpoint. Calls routed to or from this endpoint will use the incoming or outgoing configuration defined by the Channel Group.

  1. Right-click the H.323 Channel Group and select New IP Network Element. Click on the following link to display the IP Network Element Pane: IP Network Element

  2. From the H.323 Network Element field, select the desired endpoint from the drop-down list, which is populated with all configured IMGs, external gateways, and external gatekeepers. See the IP Network Elements Clientview reference for more information.