Scenario 1 - One Subnet IMG 1004

In this scenario all traffic runs over one subnet. The IP address of the interface labeled Ctrl> is configured automatically during the BootP process. When configuring H.323 or SIP Signaling, select for the IP Address in the H.323 Signaling or SIP Signaling pane.



Stream Type and Where Assigned

Sample IP Address Physical Interface Logical Interface Port on Back Plane
Control: Assigned at BootP CPU/CPU H.323/SIP CTRL CTRL
Data: Assigned in Network Interface Pane VoIP Module 0 Data Data



ClientView Panes