The following table lists the filter engine (DSP) errors (0x0A00):
|
Error name |
Hex |
Description |
Category |
|---|---|---|---|
|
FILTER_ENGINE_ERROR_OUT_OF_MEMORY |
0x0A02 |
No more memory. |
3 |
|
FILTER_ENGINE_BAD_PARAMETER |
0x0A03 |
Invalid parameter to the filter engine. |
3 |
|
FILTER_ENGINE_NOT_STARTED |
0x0A04 |
Filter engine has not been started. |
3 |
|
FILTER_ENGINE_TOO_MANY_FILTERS |
0x0A05 |
Too many filters created on one DSP. |
1 |
|
FILTER_ENGINE_CONFIG_FAILED |
0x0A06 |
Could not configure the filter engine. |
3 |
|
FILTER_ENGINE_DSP_IN_USE |
0x0A07 |
DSP was already booted. |
3 |
|
FILTER_ENGINE_BAD_IMAGE |
0x0A08 |
Invalid DSP image downloaded to the board. |
4 |
|
FILTER_ENGINE_FUNCTION_NOT_FOUND |
0x0A09 |
DSP function not available. |
4 |
|
FILTER_ENGINE_NO_RESOURCES_AVAIL |
0x0A0A |
Not enough resources. |
4 |
|
FILTER_ENGINE_BAD_FILTERTYPE |
0x0A0B |
Attempted to create an unrecognized filter type. |
1 |
|
FILTER_ENGINE_ERR_NULL_PFILTER |
0x0A0C |
Unrecognized filter type. |
3 |
|
FILTER_ENGINE_ERR_ENG_NOT_RUNNING |
0x0A0D |
DSP engine is not running; cannot create filters. |
3 |
|
FILTER_ENGINE_ERR_FUNC_NOT_ON_ENG |
0x0A0E |
Function is not loaded on the engine. |
4 |
|
FILTER_ENGINE_ERROR_BOOT_FAILED |
0x0A0F |
Failed to boot a DSP. |
2 |
|
FILTER_ENG_ERR_USAGE_EXCEEDS_RESDEF |
0x0A10 |
More DSP resources used than are defined in the resource. |
4 |
|
FILTER_ENG_ERR_USAGE_EXCEEDS_ENG_RESOURCES |
0x0A11 |
More DSP resources used than are available on the DSP. |
4 |
|
FILTER_ENGINE_ERROR_ALLOCATING_TIMESLOTS |
0x0A12 |
DSP engine could not allocate timeslots from switching. |
3 |
|
FILTER_ENGINE_ERROR_NO_TERMINAL_ID |
0x0A13 |
DSP engine not found in switching model. |
3 |
|
FILTER_ENG_ERR_USAGE_EXCEEDS_ENG_MEM_RESOURCE |
0x0A14 |
More DSP functions were started than were reserved. |
1 |