General hardware specifications

Feature

Description

TDM Bus

Features one complete H.110 bus interface with MVIP-95 enhanced-compliant switching

Processing power

One TMS320C549 DSP

Board weight

Main board: .65 lb (.28 kg)

Daughterboard: .15 lb (.08 kg)

Rear transition board: .60 lb (.24 kg)

Software

Natural Access

Electrical

CompactPCI bus designed to CompactPCI PICMG specification revision 2.1

Mechanical

Designed to the CompactPCI PICMG specifications revision 2.1 for 6U style boards

Bus Speed

33 MHz maximum

I/O Mapped Memory

Memory mapped interface for efficient block data transfers

Addresses/Interrupts

Automatically configured by CompactPCI BIOS (no jumpers or switches)

Operating temperature

0 to 50 degrees C

Storage temperature

-20 to 70 degrees C

Humidity

5% to 80%, non-condensing

0

65° C

95° C

1

65° C

95° C

2

65° C

95° C

3

55° C

85° C

4

60° C

90° C

CX 2000C-32 and

CX 2000C-32-R

BD_SEL# Active/CX 2000C Active

500 mA maximum @ 5.0 V

500 mA @ 3.3 V

CX 2000C-48

BD_SEL# Active/CX 2000C Active

750 mA maximum @ 5.0 V

500 mA @ 3.3 V

-24 to-30 V DC (low battery)

1.00 A maximum

30.5 V DC

-24 to -48 V DC (high battery)

1.00 A maximum (with 32 stations active)

52.0 V DC

Ring voltage

0.25 A (with 20 ports active)

92.0 V AC, 52.0 V DC

Return loss (ref. 600 Ohms +2.2 mF standard)

20 dB minimum (ERL)

4 to 2 wire gain tolerance

+/- 1 dB

4 to 2 wire gain range

+6 to -6 dB

2 to 4 wire gain tolerance

+/- 1 dB

2 to 4 wire gain range

+6 to -6 dB

Frequency response
300 Hz - 3200 Hz. reference to 1 kHz

+/- 1 dB

Trans-hybrid loss

20 dB minimum @ 300 Hz - 3400 Hz into 600 Ohms

Signal overload level

+3 dBm at 0 dB gain

T-R input impedance
(300 - 3200 Hz)

600 ohms

Idle channel noise through connection

< 20 dB rnC

Crosstalk transmit to receive channels

< -70 dB @ 1 kHz

Operating loop current

Maximum: 25 to 30 mA
Minimum: 10 mA

Maximum ringer equivalence load

1.5

Ringing voltage output

CX 2000C power supply module: 86 V AC, -48 V DC

CX 2000C-32-R (internal ring): 55 V AC, -30 V DC

Maximum number of telephones that can ring simultaneously

12 (for telephones with ringer equivalence = 1.0)

Maximum cable length

3000 ft

Description   

A 19" w x 5.25" h rack mount chassis containing four separate modules, each rated for 2.2 A (DC) and 0.1 7 A (DC) output current. The modules operate in a parallel mode output current.

Input power

90-132/180-264 V AC 47-63 Hz automatic range selection.

DC output

24 V C/ 30 V DC and -48 V DC @ 2.2 A/module total.

DC output regulation

Less than 1%.

DC output ripple

Less than 0.5% peak to peak.

Output isolation

24 V DC and -48 V DC isolated from chassis ground. AC output is referenced by -48 V DC output.

AC output

0.17 A/module with 100% duty cycle.

AC output frequency

17, 20, 25, or 50 Hz +/-1 0% switch selectable.

AC output regulation

Less than 10% for the full input voltage range and no load to full load. 90 V AC maximum.

AC output wave form

Simulated sine wave with less than 20% distortion.

Current limiting

All outputs have current limiting with full protection and auto recovery.

Output indicator

Green LED on the module indicates that all outputs are operating. External signal indicates an alarm condition.

Module failure protection

A failure in any module results in its outputs being automatically taken offline.

Temperature range

Ambient temperature range is 0 to 50 degrees C for full load operation.

EMI design standards

Approved to FCC 20780, Part 15, Class B, EN55022, Class B, and EN50082-1.

Safety design standards

Approved to EN60950, UL1950 3rd edition and 1/24/00 CSA C22.2-950.