Product Name

IP Network Interface Series 2 Card

IP Network Interface Series 2 card ID

101 (0x65)

IP Network Interface Series 2 card VoIP Module Board ID

104 (0x6D)

Multi-Function Media I/O card ID

202 (0xCA)

L3 PPL Component ID

159 (0x9F)

L3 PPL Protocol ID

BOOT Protocol = 11 (0x0B)
VOCC VoIP Protocol = 12 (0x0C)

Host L3 PPL Download Support

Host Downloadable PPL Tables are not supported

TFTP Additions

VOCCVOIP_LOAD = vocc_ip.bin* = SAVE_LOAD_FALSE
VOCCVM_H_LOAD = vocc_vmh.bin* = SAVE_LOAD_FALSE
VOCCVM_M_LOAD = vocc_vmm.bin* = SAVE_LOAD_FALSE

Important! *The actual .bin file names change off of the build release.

Default Resource Profile

G.711+G.726+ G.723.1+G.729A/B+T.38 (Profile 2)

Default Gateway Mode

Gateway Mode

PCM Companding Law

m-Law

Control Interface

The IP Network Interface Series 2 card is controlled by the CSP Matrix Series 3 Card using the API message set.

Data Interface

VoIP data is transported using the three external 100Base-T (100 Mbps) Ethernet ports on the Multi-Function Media I/O card. All three ports are configured as a single Link Aggregate Group (LAG), extending the total bandwidth to 300 Mbps and providing automatic link redundancy. If interfaced with a LAG compatible Ethernet Switch, all three ports can be utilized. If not, only ONE of the three ports can be connected to the Ethernet network, if LAG is not used.