You are here: CSP Developer’s Guide: Internet Protocol > 5 Session-Initiation Protocol (SIP) Software > Configuration
Overview
You can configure the CSP and SIP using either the SwitchKit Converged Services Administrator (CSA) GUI or the EXS API. The EXS API messages related to SIP are included in this document. For information on CSA, see the Converged Services Administrator User’s Guide.
The following are the basic steps to configure SIP software.
1. Activate SIP Software with product license keys For details, refer to Downloading License Keys in the Licensing Overview chapter in the Developer’s Guide: Overview and the Product License Download message (0x0079) in the API Reference.
2. Assign IP Network Interface card IP Addresses.
3. Assign Logical Span IDs for IP Network Interface.
4. Configure Answer Supervision for Notify Host of Answer using the PPL Configure (0x00D7) message.
5. Bring the spans in service.
6. Bring the channels in service.
7. Configure optional IP Network Interface attributes.
8. Configure Routing.
9. Configure SIP attributes.
The following configuration options are supported for SIP using TLVs in the VoIP Protocol Configure (0x00EE) message.
Table 5-1 SIP Attribute
|
TLV Tag and Name |
Default |
|---|---|
|
0x01D0 Gateway Mode |
Normal Mode (Non-Gateway Mode) (0x02) |
|
0x01C8 Protocol Type |
SIP (0x04) |
|
0x0262 Use SIP Local Port |
5060 (0x13C4) |
|
0x0263 Use SIP Remote Port/Default Proxy Port |
5060 (0x13C4) |
|
0x0264 Use SIP Remote Host/Default Proxy Host |
No default |
|
0x0265 Use SIP Site ID |
EXCEL-CSP |
|
0x0266 Use SIP Anonymous Caller |
0000 |
|
0x0267 Use SIP Invite T1 Timer |
500 ms (0x1F4) |
|
0x0268 Use SIP BYE T1 Timer |
500 ms (0x1F4) |
|
0x0269 Use SIP T2 Timer |
4000 ms (0x190) |
|
0x026A Use SIP Maximum Retransmissions Invite |
7 (0x07) |
|
0x026B Use SIP Max Retransmissions BYE |
11 (0x0B) |
|
0x0270 SIP Tunnel Type |
Disabled |
|
0x0272 Use SIP Registration Timeout |
3600 s (0xE10) |
|
0x0274 Use No Local Media |
Terminate media locally (0x01) |
|
0x0275 Local Registration Enable/Disable |
Enabled |
|
0x0279 SIP Local Route Lookup |
Disabled (0x00) |
|
0x027A SIP Registration Mode |
Do not notify host (0x00) |
|
0x027C Min-SE Interval |
300 s (0x12C) |
The following is a sample configuration file to configure SIP on the CSP:
Product licence for SIP
00 19 00 79 00 00 ff 01 02 24 10 46 46 42 35 4b 4a 47 58 59 42 41 4c 4c 32 30 4b
'Deassign all spans
00 0d 00 a8 00 00 ff 00 01 11 04 ff ff ff ff
Deassign IP IP address for the VDAC
00 45 00 e7 00 00 ff 00 01 01 01 0c 00 06 01 09 ff ff ff ff ff ff ff ff 00 01 09 00 ff ff ff ff ff ff ff 00 01 09 01 ff ff ff ff ff ff ff 00 01 09 02 ff ff ff ff ff ff ff 00 01 09 03 ff ff ff ff ff ff ff 00 02 00
00 45 00 e7 00 00 ff 00 01 01 01 0c 00 06 01 09 ff 87 77 2C 38 ff ff ff e0 01 09 00 87 77 2C 39 ff ff ff e0 01 09 01 87 77 2C 3a ff ff ff e0 01 09 02 87 77 2C 3b ff ff ff e0 01 09 03 87 77 2C 3c ff ff ff e0 02 00
'Assign spans to VDAC Card
00 0d 00 a8 00 00 ff 00 01 11 04 00 a8 0c 00
00 0d 00 a8 00 00 ff 00 01 11 04 00 a9 0c 01
00 0d 00 a8 00 00 ff 00 01 11 04 00 aa 0c 02
00 0d 00 a8 00 00 ff 00 01 11 04 00 ab 0c 03
00 0d 00 a8 00 00 ff 00 01 11 04 00 ac 0c 04
Configure Answer Supervision: Propagate answer and Notify host
00 17 00 bb 00 00 ff 01 02 0d 03 00 a8 00 0d 03 00 a8 1f 00 61 01 01 02 02
00 17 00 bb 00 00 ff 01 02 0d 03 00 a9 00 0d 03 00 a9 1f 00 61 01 01 02 02
00 17 00 bb 00 00 ff 01 02 0d 03 00 aa 00 0d 03 00 aa 1f 00 61 01 01 02 02
00 17 00 bb 00 00 ff 01 02 0d 03 00 ab 00 0d 03 00 ab 1f 00 61 01 01 02 02
00 17 00 bb 00 00 ff 01 02 0d 03 00 ac 00 0d 03 00 ac 1f 00 61 01 01 02 02
VoIP Configure
00 0f 00 ee 00 00 ff 00 00 00 00 01 01 c8 00 01 04