You are here: CSP Developer’s Guide: Internet Protocol > 5 Session-Initiation Protocol (SIP) Software > PPL Information: SIP UA 0x00A7
PPL Information: SIP UA 0x00A7
Overview
The following contains information on PPL Event IDs used for the SIP User Agent (UA).
PPL Event Requests
|
PPL Event ID |
Purpose |
Description |
AIB Used |
|---|---|---|---|
|
SIP Registration Support (See details following this table.) |
|
||
|
0x000A |
Accept Registration Request |
The host application uses this ID to accept the registration request. |
0x7F - Stack ID |
|
0x000B |
Reject Registration Request |
The host application uses this ID to reject the registration request. |
0x7F - Stack ID |
|
0x000C |
Authenticate Request |
NPDI formatted data for scheme, realm, username and password required to authenticate the incoming SIP call. |
0x7F - Stack ID
|
|
0x0010 |
Query All Registration |
Queries all registration entries in the CSP database. |
0x7F - Stack ID |
|
0x0011 |
Query Single Registration |
Queries individual registration information from the CSP. |
0x7F - Stack ID |
|
0x0012 |
Delete All PPL Registrations |
Deletes all end points registered with the CSP. |
0x7F - Stack ID |
|
0x0013 |
Delete Specific Registration |
Deletes individual registration information from the CSP. The host application must provide the To Username parameter in the request that it sends.
|
0x7F - Stack ID |
|
Call Control (See details following this table.) |
|
||
|
0x000C |
Authenticate Request |
NPDI formatted data for scheme, realm, username and password required to authenticate the incoming SIP call. |
0x0D - Channel
|
|
0x001E |
Change Local Media Connection Attribute |
Used to change the local media connection attribute. |
0x0D - Channel |
|
0x001F |
Generate Early Media |
Used by host application to generate early media by sending 183 response code with SDP for an incoming call. |
0x0D - Channel
|
|
0x0020 |
Notify |
Contains TLV 0x294B Notify Status which contains the SIP status to be sent to the UA, within a NOTIFY message. |
0x0D - Channel
|
|
0x0021 |
Generates SIP ACK with SDP |
Used in CAM delayed media scenario to send answer media parameters in ACK. This PPL ER must contain the TLV 0x2A00 Media Remote End Point Information. |
0x0D - Channel |
|
0x0023 |
Subsequent Data |
Used by the host application to send data to the CSP that could not be sent in the Route Control message. |
0x0D - Channel
|
|
0x0024 |
Generate RE-INVITE |
Generates RE-INVITE message to the SIP endpoint connected to that channel Works only if the call is in bearer-free mode. |
0x0D - Channel |
|
0x0025 |
Generate INFO |
Generates INFO Message. |
0x0D - Channel |
|
0x0026 |
Generate 182 |
Generates 182 Queued message |
0x0D - Channel |
|
0x0027 |
Generate outbound REFER |
Generates an outbound REFER request with the refer target URL filling in the TLV |
0x0D - Channel |
|
0x0029 |
Do Not Close Socket |
Prevents automatic closing of a socket -typically a TCP socket. |
0x0D - Channel
|
A call handle is used for all SIP Registration PPL Event Requests. Events 0x000A 0x000B 0x000C use the Call Handle that was reported in the associated PPL Event Indication. All other registration events use a Call Handle of 0xFFFF
Example: Querying all Registrations:
00 12 00 44 00 00 ff 00 01 7f 04 ff 00 ff ff 00 a7 00 10 00
Connection mode can be changed with TLV 0x27B3 NPDI RTP Connection Mode.
Change Local Media Connection Attribute
Example: Change the Connection to Listen Mode:
00 1d 00 44 00 02 ff 00 01 0d 03 00 01 04 00 a7 00 1e 01 03 00 33 00 07 00 01 27 b3 00 01 01
Example: Generate Early Media H->X:
00 11 00 44 00 00 ff 00 01 0d 03 00 01 02 00 a7 00 1f 00
The following TLVs are used with the PPL event ID 0x0C:
• 0x2937 NPDI SIP Authenticate Scheme
• 0x2938 NPDI SIP Authentication Realm
• 0x2939 NPDI SIP Authenticate Username
• 0x293A NPDI SIP Authenticate Password
• 0x293F NPDI SIP Authentication Timeout
The following TLVs are used with the Route Control message.
• 0x293B NPDI SIP Authorization Username
• 0x293C NPDI SIP Authorization Password
• 0x293D NPDI SIP Proxy Authorization Username
• 0x293E NPDI SIP Proxy Authorization Password
The remote_ip variable is the four-byte IP Address of the remote socket that was reported to the host application in the Request for Service message with the SIP Remote IP Address TLV.
The remote_port variable is the two-byte port number of the remote socket that was reported to the host application in the Request for Service message with the SIP Remote IP Port TLV.
00 27 00 44 00 00 FF 00 01 7f 04 ff 00 ff ff 00 a7 00 28 01 03 00 33 00 10 00 02 29 4E 00 04 0A 0A 29 4F 00 02 00 01
In response to a Request for Service message containing a SIP Transport Type TLV containing the following:
• a value of 2 = TCP
• the SIP Remote IP Address
• SIP Remote IP Port TLVs
The host application may determine that the underlying socket needs to remain open to allow the reuse of this socket for multiple transactions. When that is the case, the host application immediately sends this PPL Event Request message to prevent the socket from closing.
Example:
00 11 00 44 00 00 FF 00 01 0d 03 00 00 01 00 a7 00 29 00
Table 5-3 PPL Event Indications
|
PPL Event Indication ID |
Purpose |
Description |
|---|---|---|
|
SIP Registration Support |
||
|
0x000A |
Incoming Registration Request |
Informs the host application of an incoming REGISTER message. |
|
0x000B |
Registration Timer Expired |
Informs the host application about an expired registration. |
|
0x000C |
Incoming De-registration Request |
Informs the host application that a remote UA requested to delete a registration. |
|
0x000D |
Registration Query Response |
Sends registration information to the host application as a response to a query message. |
|
Call Control |
||
|
0x001E |
Media Change Detected |
Sent to the host application whenever the remote side changes its media connection attributes with the |
|
0x001F |
183 Progress |
Notifies the host application that the remote side sent a 183 Response Code. If SDP data is in the response, the CSP sends the data to the host application in NPDI TLV format as follows: 0x2794 - Destination IP Address 0x2795 - Destination RTP Port 0x29FF - Media Local End Point Information - if Call Agent is enabled (must be less than 250 bytes). |
|
0x0020 |
Answer on B-Side |
Sent to the host application when the CSP receives a 200 OK response with a Session Description Protocol (SDP) for an outbound call. This PPL Event Indication contains the TLV 0x29FF Media Local End Point Information (must be less than 250 bytes). |
|
0x0021 |
Blind Refer PPL Event Indication |
Notifies the host application that a Blind Refer event has occurred. The host application must respond by sending the PPL Event Request Notify with an appropriate SIP status. This PPL Event Indication will contain several TLVs as follows: 0x2916 SIP A Leg Transport Type 0x2919 NPDI SIP To User Name 0x291B NPDI SIP To Host Name 0x291C NPDI SIP to Port Name 0x291A NPDI SIP To Password (optional) |
|
0x0022 |
Consultative Refer PPL Event Indication |
Notifies the host application that a Consultative Refer Event has occurred. The host application must respond by sending the PPL Event Request Notify with an appropriate SIP status. The PPL Event Indication contains the following TLVs: 0x2919 NPDI SIP To User Name 0x291B NPDI SIP To Host Name 0x291C NPDI SIP to Port Name 0x294C Refer Spans Channel 0x291A NPDI SIP To Password (optional) |
|
0x0023 |
Subsequent Data |
Notifies the host application that the CSP is sending more data that could not be sent in the Request for Service with Data message. |
|
0x0024 |
180 Ringing |
Notifies the host application that the remote side sent a 180 Response Code. If SDP data is in the response, the CSP sends the data to the host application in NPDI TLV format as follows: 0x2794 - Destination IP Address 0x2795 - Destination RTP Port 0x29FF - Media Local End Point Information - if Call Agent is enabled (must be less than 250 bytes). |
|
0x0025 |
Send subsequent data |
Notifies the host application that the SIP UA is ready to accept more data from the host application. |
|
0x0026 |
All subsequent data received |
Notifies the host application that the SIP UA received the last message in the sequel.
|
|
0x0027 |
Result of the sent REFER request |
Reports a REFER response was received and the Response Code received. The value in the SIP Response Code TLV (0x2915) reports the exact response code Success - 2xx Failure - 4xx-6xx |
|
0x0028 |
Status of the Reference |
Reports a NOTIFY request was received and the response code from the NOTIFY body. The value in the SIP Response Code TLV (0x2915) reports the exact response code. |
|
0x0029 |
Reported to the host when the CSP receives an ACK. |
Contains the SDP received in the SIP ACK message in 0x29FF TLV (Media Local End Point Information) |
|
0x002A |
PRACK Received |
|
|
0x002B |
PRACK automatically generated to the network |
|
|
0x0031 |
422 Session Timer Too Small |
Reports the Session Expiry Interval and Minimum Session Expiry interval used in the Re-transmit INVITE message. The values in the following TLVs report this information: SIP Session Expiry Interval (0x2969) SIP Minimum Session Expiry Interval (0x2970) |
|
0x002C |
INFO Received |
Report receipt of INFO message. |
|
0x002D |
Response for INFO |
Report the response received for the INFO message sent. |
|
0x002E |
182 Received |
Report receipt of 182 Queued message. |