General hardware specifications

PCI bus

32-bit 66, 33, 66 MHz PCI bus

PCI universal expansion board

Compatible with 5.0 V or 3.3 V signaling environments

Digital trunk interfaces

Four trunks: Two Dialogic® MD1 RJ-45 interfaces, each with two trunks

Board weight

Main board: 0.45 lb to 0.47 lb (0.20 kg)

Universal port capacity

• Comprehensive IVR support

• Echo cancellation

• Vocoding: G.711, G.723.1, G.729a/b, G.726

• Fax: T.38 real-time, T.37 store-and-forward

Processors

T1 TMS320C5441, each with four 133 MHz cores

Capacity

Up to 120 universal ports

Physical

Dual 10/100Base-T Ethernet interfaces

Protocols

ARP

ICMP

IPSec

IPv4

IPv6

RTP/RTCP

UDP

Physical

Up to four Dialogic® MD1 RJ-45 T1/E1 digital trunk interfaces

Protocols

ISDN

CAS

Capacity

Up to 120 ports

Approvals

Refer to www.dialogic.com/declarations/default.htm for a list of countries where Dialogic has obtained approval for the board.

Development environment

NaturalAccess

Operating systems

Windows

UNIX

Red Hat Linux

Electrical

PCI bus designed to the PCI Local Bus Specification, Revision 2.2.

Mechanical

PCI bus designed to the PCI Local Bus Specification, Revision 2.2.

Bus speed

DC to 66 MHz

Bus type

32-bit master or slave

I/O mapped memory

Memory-mapped interface for efficient block data transfers

Addresses/interrupts

Address and interrupts automatically configured by PCI BIOS (no jumpers or switches)

Operating temperature

0 to 50 °C

Storage temperature

-20 to 70 °C

Humidity

5 to 80%, non-condensing

CG 6060 board in reset

0.574 A maximum

0.557 A maximum

CG 6060 board active

1.446 A maximum

1.102 A maximum