<<

OAM
   Customizing OAM configuration files
   NMS OAM
oamgen
oamsys
   Creating a system configuration file
   NMS OAM
ones density

pciscan
PCM (pulse code modulation)
provision
   Provisioning an NMS GR303 interface
   Provisioning_an_NMS_V5_interface

RDT applications
re-provision
   Re-provisioning an existing interface
   Re_provisioning_an_NMS_GR303_interface
robbed-bit signaling
   Natural Access components
   NMS DLCP system overview
   Signaling
runfiles

SA7 bit
signaling
   Natural Access components
   NMS DLCP system overview
   Signaling
software requirements
standalone mode
   Running nms303tool in standalone mode
   Running nmsv5tool in standalone mode
state diagrams
   NMS GR303 library state model
   NMS V5 library state model
status
   Monitoring E1 link status information
   Retrieving channel and link status information
   Retrieving HDLC channel and E1 link status informa
   Starting and monitoring an NMS GR303 interface
structures
   NMS GR303 library structures
   NMS V5 library structures
superframe
SWI service
   Natural Access components
   NMS DLCP system overview
switching
system configuration file
system requirements
system resources

T1 framing
T1 trunk channels
   AMI, ones density, and zero code suppression
   Channels and transmission rates
   Framing
   Signaling
   Specifying T1 link and HDLC channel locations
   Verifying T1 connections
   Voice encoding
TCPs
   Configuring HDLC processing on CG 6000/C boards
   Trunk control programs
TDM (time-division multiplexing)
tracing
   NMS_GR303SetTrace
   NMS_V5SetTrace
trunk control programs
   Configuring HDLC processing on CG 6000/C boards
   Trunk control programs
trunkmon
   Verifying E1 connections
   Verifying T1 connections

upper layers

V5.2
   Access AV5 V5.2 protocol support
   Developing AN applications
   Digital loop carrier protocols
voice encoding

zero code suppression