Trunk Configuration table

The following table summarizes the objects in the Trunk MIB Configuration table, otherwise known as the dsx1ConfigEntry block of variables:

Object	Type	Description
dsx1LineIndex	Integer	DS1 interface in this managed node.
dsx1IfIndex	Integer	Same as dsx1LineIndex.
dsx1TimeElapsed	Integer	Time of current measurement period.
dsx1ValidIntervals	Integer	Number of 15 minute measured intervals.
dsx1LineType	Integer	Type of DS1 interface.
dsx1LineCoding	Integer	Type of zero code suppression for this interface.
dsx1SendCode	Integer	Type of code in the interface.
dsx1CircuitIdentifier	DisplayString	Transmission vendor's circuit identifier.
dsx1LoopbackConfig	Integer	Loopback configuration.
dsx1LineStatus	Integer	Interface status.
dsx1SignalMode	Integer	Circuit's signal mode.
dsx1TransmitClockSource	Integer	Source of the transmit clock.
dsx1Fdl	Integer	Facilities data link.
dsx1InvalidIntervals	Integer	Number of intervals with invalid data (always 0, not supported).
dsx1LineLength	Integer	Length of the DS1 line in meters (always 0, not supported).
dsx1StatusLastChange	TimeStamp	Time the status of the interface last changed.
dsx1LineStatusChangeTrapEnable	Integer	Whether traps are generated for this interface.
dsx1LoopbackStatus	Integer	Current state of the loopback on the DS1 interface.
dsx1Ds1ChannelNumber	Integer	Channel number of the DS1/E1 on its parent DS2/E2 or DS3/E3.
dsx1Channelization	Integer	Whether this DS1/E1 is channelized or not.