Use the following functions to monitor calls and send messages to the remote terminal:
|
Function |
Description |
|
Sends an H.223 skew indication to the terminal. |
|
|
Formats an H.324M event into a string for print diagnostics. |
|
|
Closes an existing video logical channel and then re-opens the channel with user-supplied logical channel parameters. |
|
|
Sets the DTMF mode and payload IF for RFC 2833 DTMF events sent on a pass-through channel. |
|
|
Plays an application-provided RFC 2833 DTMF event onto the IP network in RTP encapsulation. |
|
|
Sends a round trip delay message to the remote terminal. |
|
|
Submits Natural Access events from the event queue to the H.324M Middleware. |
|
|
Sends a user indication (UII H.245) message to the terminal. |
|
|
Sends a vendor ID indication to the remote terminal. |
|
|
Sends a video fast update message to the remote terminal. |
|
|
Sends a VideoTemporalSpatialTradeoff message to the remote terminal. |