Events ordered by category

This topic presents the ADI service events by category. The following fields are always assigned, regardless of the event:

The remaining value, size, and buffer fields vary depending upon the event. If there is no relevant information for a field, it can be empty for the specific event. The buffer field is filled only if data is given to the application. Any events that yield data are noted. The value field can contain an error code if the operation is in error when started or if the function fails.

Administrative events

ID

Value field

Size field

ADIEVN_BOARD_ERROR

low word=parm0

high word=xx00

low word=parm1

high word=parm2

ADIEVN_BOARD_EVENT

low word=msgtyp

high word=obj

low word=parm0

high word=parm1

ADIEVN_STARTPROTOCOL_DONE

ADI_REASON_xxx

 

ADIEVN_STOPPROTOCOL_DONE

ADI_REASON_xxx

 

Play and record events

ID

Value field

Size field

ADIEVN_PLAY_BUFFER_REQ

1=started

2=underrun

 

ADIEVN_PLAY_DONE

ADI_REASON_xxx

Bytes played

ADIEVN_RECORD_BUFFER_FULL

1=buffer requested

2=underrun

3=both

Buffer size

ADIEVN_RECORD_DONE

ADI_REASON_xxx

Bytes recorded

ADIEVN_RECORD_EVENT

 

 

ADIEVN_RECORD_STARTED

0 (zero) or ADI_RECORD_BUFFER_REQ

 

Note: The CTA_EVENT.buffer field for ADIEVN_RECORD_BUFFER_FULL contains a data pointer.

DTMF events

ID

Value field

Size field

ADIEVN_COLLECTION_DONE

ADI_REASON_xxx

String length + 1

ADIEVN_DIGIT_BEGIN

0 through 9, A through D, * (asterisk), # (number sign)

 

ADIEVN_DIGIT_END

0 through 9, A through D, * (asterisk), # (number sign)

 

ADIEVN_DTMF_DETECT_DONE

ADI_REASON_xxx

 

Note: The CTA_EVENT.buffer field for ADIEVN_COLLECTION_DONE contains a data pointer.

MF events

Size field is not applicable.

ID

Value field

ADIEVN_MF_DETECT_DONE

ADI_REASON_xxx

ADIEVN_MF_DIGIT_BEGIN

0 through 9, B through F

ADIEVN_MF_DIGIT_END

0 through 9, B through F

Note: See adiStartMFDetector for translation of MF events.

Call progress events

Size field is not applicable.

ID

Value field

ADIEVN_CP_BUSYTONE

 

ADIEVN_CP_CED

 

ADIEVN_CP_DIALTONE

 

ADIEVN_CP_DONE

ADI_REASON_xxx

ADIEVN_CP_NOANSWER

 

ADIEVN_CP_RINGQUIT

 

ADIEVN_CP_RINGTONE

Number of rings

ADIEVN_CP_REORDERTONE

 

ADIEVN_CP_SIT

 

ADIEVN_CP_VOICE

ADI_CP_VOICE_xxx

Note: Number of rings is set to 1 on the first occurrence of the event. If the call progress stopmask is set to enable multiple ring events, this field contains a count of the number of rings.

Tone detector events

Size field is not applicable.

ID

Value field

ADIEVN_TONE_1_BEGIN

 

ADIEVN_TONE_1_DETECT_DONE

ADI_REASON_xxx

ADIEVN_TONE_1_END

 

ADIEVN_TONE_2_BEGIN

 

ADIEVN_TONE_2_DETECT_DONE

ADI_REASON_xxx

ADIEVN_TONE_2_END

 

ADIEVN_TONE_3_BEGIN

 

ADIEVN_TONE_3_DETECT_DONE

ADI_REASON_xxx

ADIEVN_TONE_3_END

 

ADIEVN_TONE_4_BEGIN

 

ADIEVN_TONE_4_DETECT_DONE

ADI_REASON_xxx

ADIEVN_TONE_4_END

 

ADIEVN_TONE_5_BEGIN

 

ADIEVN_TONE_5_DETECT_DONE

ADI_REASON_xxx

ADIEVN_TONE_5_END

 

ADIEVN_TONE_6_BEGIN

 

ADIEVN_TONE_6_DETECT_DONE

ADI_REASON_xxx

ADIEVN_TONE_6_END

 

Call control primitives

ID

Value field

Size field

ADIEVN_DIAL_DONE

ADI_REASON_xxx

 

ADIEVN_FSK_RECEIVE_DONE

ADI_REASON_xxx

Buffer size

ADIEVN_FSK_SEND_DONE

ADI_REASON_xxx

 

ADIEVN_PULSE_DONE

ADI_REASON_xxx

 

ADIEVN_QUERY_SIGNAL_DONE

ADI_REASON_xxx

ADI_BIT_xxx

ADIEVN_SIGNALBIT_CHANGED

ADI_x_BIT_xxx

ADI_BIT_xxx

ADIEVN_SIGNAL_DETECT_DONE

ADI_REASON_xxx

 

Note: The CTA_EVENT.buffer field for ADIEVN_FSK_RECEIVE_DONE contains a data pointer.

Miscellaneous events

ID

Value field

Size field

ADIEVN_ECHOCANCEL_STATUS

 

Size of ADI_ECHOCANCEL_STATUS_INFO

ADIEVN_ECHOCANCEL_TONE

low word=type of tone

high word=frequency

 

ADIEVN_ENERGY_DETECT_DONE

ADI_REASON_xxx

Event ID (if condition is FINISHED)

ADIEVN_ENERGY_DETECTED

 

 

ADIEVN_SILENCE_DETECTED

 

 

ADIEVN_TIMER_DONE

ADI_REASON_xxx

 

ADIEVN_TIMER_TICK

Tick count

 

Note: The CTA_EVENT.buffer field for ADIEVN_ECHOCANCEL_STATUS contains a data pointer.