acoustic echo control
ADI commands
adsir.f41
adsix.f41
AEC
AMI
amr.f41
AutoStart
AutoStop
board keyword files
changing configuration parameters
configuring and starting the system with oamsys
keyword types
sample board keyword file
setting keyword values
verifying the board installation
verifying trunk connections
Boards[x]
BootDiagnosticLevel
Buffers[x].Size
bus termination
bypass state
Setting or retrieving the echo cancellation bypass state
Using echo cancellation bypass
cables
call progress masks
callp.f41
CAS
Channel associated signaling (CAS)
CAS mode switching
CCS
CEPT E1 G.703 telephony interface
CG board plug-in
CG driver software
CG plug-in keywords
cg6conf.f41
cg6kcon
cg6ktool
cgcnfm.f41
cgcnfs.f41
cgroute
cgsetkey
cgtrace
cgv6if
channel associated signaling (CAS)
Channel associated signaling (CAS)
CAS mode switching
channels
clocking
Clocking.HBus.AutoFallBack
Clocking.HBus.ClockMode
Clocking.HBus.ClockSource
Clocking.HBus.ClockSourceNetwork
Clocking.HBus.FallBackClockSource
Clocking.HBus.FallBackNetwork
Clocking.HBus.NetRefSource
Clocking.HBus.NetRefSourceNetwork
Clocking.HBus.NetRefSpeed
Clocking.HBus.SClockSpeed
Clocking.HBus.Segment
common channel signaling (CCS)
companding
components
Software components
CG 6565 board features
ConferencingStream.Enable
ConferencingStream.SlotCount
configuration files
Configuring and starting the system with oamsys
Creating a system configuration file for oamsys
Using board keyword files
configuring
board clocking
board keyword files
configuration file location
DIP switches
parameter settings
system configuration file
connectors
Connecting to a T1 network
Connecting to an E1 network
Testing in loopback mode
cooling requirements
CRC signal checking
ctatest
dark office feature
debugging
Debugging resource management
cgtrace - Performing CG board debugging
DebugMask
demonstration programs
DetectedBoards[x]
DIP switch
DLMFiles[x]
DLMs
DPFs
Conditional relationships between DPFs
f41info - Displaying DPF file resource usage
DSPs, DPMs, and DPFs
DPMs
Driver.BoardID
Driver.Name
drivers
DSP.C5x[x].CmdQSize
DSP.C5x[x].CmdQStart
DSP.C5x[x].DataInQSize
DSP.C5x[x].DataInQStart
DSP.C5x[x].DspOutQSize
DSP.C5x[x].DspOutQStart
DSP.C5x[x].Image
DSP.C5x[x].Libs[y]
DSP.C5x[x].NumRxTimeSlots
DSP.C5x[x].NumTxTimeSlots
DSP.C5x[x].OS
DSP.C5x[x].XLaw
DSPs
DSP files and MIPS requirements
DSPs, DPMs, and DPFs
DSP files
DSPStream.SignalIdleCode[x]
DSPStream.SlotCount
DSPStream.VoiceIdleCode[x]
DSX-1 telephony interface
dtmf.f41
dtmfe.f41
dual IP stack mode
dual subnet mode
Configuring the board in dual subnet mode
Running in IPv4/IPv6 dual stack mode
DynamicRecordBuffers
E1 120 ohm
E1 75 ohm
E1 framing
E1 network connection
Connecting to an E1 network
Configuring the T1 or E1 interface
echo canceler reference stream
Echo.AutoSwitchingRefSource
Echo.EnableExternalPins
echo cancellation
Echo cancellation restriction
Echo cancellation MIPS
Configuring hardware echo cancellation
Setting or retrieving the echo cancellation bypass state
Setting or retrieving the nonlinear processing state
Setting or retrieving the acoustic echo control state
Using echo cancellation control
echo_v3.f41
echo_v4.f41
Echo.AutoSwitchingRefSource
Echo.EnableExternalPins
echo.f41
EEPROM
EEPROM keywords
eight-trunk board
CG 6565e board variants
Cabling a CG 6565e board
EnableMonitor
environment
ESF (extended superframe)
Ethernet
dual stack mode
dual subnet
Ethernet LEDs
Ethernet link status events
Ethernet network
IP security
cgsetkey - Configuring IPv6 security keys and policies
IP Security and IPv6
IPv4
Configuring IPv4 Ethernet connections
Running in IPv4/IPv6 dual stack mode
IPv6
Configuring IPv6 Ethernet connections
Running in IPv4/IPv6 dual stack mode
multi-homed configurations
redundant Ethernet
Ethernet connectors
extended superframe (ESF)
f_amr.f41
f_evrc.f41
f_faxt38.f41
f_g711.f41
f_g711vad.f41
f_gsm_fr.f41
f_ilbc_20.f41
f_ilbc_30.f41
f41info
facilities data link (FDL)
fan tachometer
FanTach.WarnThres
FDL
four-trunk board
Cabling a CG 6565e board
CG 6565e board variants
framing
Fusion
g723.f41
g726.f41
g729a.f41
gsm_ms.f41
gsm_mspl.f41
H.100 bus termination
H.100 compliant interface
hardware specifications
HardwareEcho.EchoChipEnabled
HardwareEcho.Trunk[x].OnOffTimeslots
HardwareEcho.XLaw
Hdlc[x].Boot
Hdlc[x].RxTimeSlot
Hdlc[x].TxTimeSlot
humidity
ima.f41
incta
informational keywords
installing
CG driver software
configuring the hardware
connecting to the network
Connecting to a T1 network
Connecting to an E1 network
summary
system requirements
verifying the installation
IP security
cgsetkey - Configuring IPv6 security keys and policies
IP security and IPv6
IPC.AddRoute[x].DestinationAddress
IPC.AddRoute[x].GatewayAddress
IPC.AddRoute[x].Interface
IPC.AddRoute[x].Mask
IPC.AddRoute[x].VlanTag
IPv4
dual stack mode
dual subnet
IPC keywords
redundant Ethernet
IPv6
dual stack mode
dual subnet
IPSec
cgsetkey - Configuring IPv6 security keys and policies
IP security and IPv6
keywords
redundant Ethernet
IPv6.Link[x].Enable
IPv6.Link[x].EnablePing
IPv6.Link[x].HopLimit
IPv6.Link[x].ICMPRateLimit
IPv6.Link[x].IPSec
IPv6.Link[x].MTU
IPv6.Link[x].NDAttempts
IPv6.Link[x].NDReachabilityTimer
IPv6.Link[x].NDRetranTimer
>>