Specifies the level of diagnostics performed during initialization of the board. When disabled (set to 0) the board ignores any diagnostic errors returned while it is being initialized.
BootDiagnosticLevel = level
Read/Write (plug-in level)
Integer
1
-65535 to 65535
BootDiagnosticLevel = 1
The valid values for level are 0, and 1. Zero (0) indicates that no diagnostics are performed, and 1 is the maximum level.
If a test fails, the test number is reported back as the error code.
Note: Some tests can pass back more than one error code, depending on the options selected and/or the mode of failure.
You must be running oammon to view diagnostic results.