The Native play record test (natprtest) program verifies that the system supports creating and enabling MSPP connections and ADI ports and demonstrate NMS native play and record functionality. This sample program demonstrates NaturalAccess and Fusion functions executing in asynchronous mode.
NaturalAccess, Voice Message API, MSPP API, and ADI API functions.
Use natprtest to:
Verify proper installation and operation of the NCC API and the ADI service.
Experiment with the NaturalAccess native play record feature.
Demonstrate working examples of NaturalAccess and NCC API or ADI API functions.
Demonstrate creating, connecting, enabling, disabling, disconnecting, and destroying MSPP endpoints and channels.
Demonstrate sending commands to MSPP endpoint and channel filters.
natprtest [options]
where valid options include:
|
Option |
Description |
|
A xxxmgr |
The NaturalAccess service manager. Default: ADIMGR |
|
-b n |
The board number n. Default: 0 |
|
-C filename |
Load a keyword configuration from a text file. Keywords supported are:
|
|
-f filename |
The file name to retrieve service names. Default: None |
|
-F filename |
The name of the NaturalAccess configuration file. Default: cta.cfg. The configuration file must specify to initialize the msp service and msgmgr service manager. |
|
-i filename |
The name of the input file. This option allows you to use a file that lists NaturalAccess test commands and data line by line, instead of entering the commands interactively. |
|
-l |
Show low-level events. |
|
-p protocol |
Protocol to run. Default is nocc. |
|
-s [stream:]slot |
The port (DSP) address. Default is 0:0. |
|
-e localip |
Local IP address for an RTP or UDP endpoint. If no RTP or UDP endpoint is created, this value is ignored. The IP address must be appropriate for the type of RTP endpoint specified (that is, an IPv4 address for an IPv4 endpoint or an IPv6 address for an IPv6 endpoint). Entering 0 indicates that the data will not be transferred to an IP network. Use for testing purposes only. |
|
-r remoteip |
Remote IP address for an RTP or UDP endpoint. If no RTP or UDP endpoint is created, this value is ignored. The IP address must be appropriate for the type of RTP endpoint specified (that is, an IPv4 address for an IPv4 endpoint or an IPv6 address for an IPv6 endpoint). Entering 0 indicates that the data will not be transferred to an IP network. Use for testing purposes only. |
|
-c chantype |
Type of MSPP channel to connect endpoints. Valid channel types include: 1 G.711 full duplex 2 G.723 full duplex 3 G.726 full duplex 4 G.729 full duplex 5 Fax relay full duplex 6 G.711 encoder simplex 7 G.711 decoder simplex 8 G.723 encoder simplex 9 G.723 decoder simplex 10 G.726 encoder simplex 11 G.726 decoder simplex 12 G.729 encoder simplex 13 G.729 decoder simplex 14 G.728 full duplex 15 G.728 decoder simplex 16 G.728 encoder simplex 17 RTP switching simplex |
|
-t tracemode |
Enables or disables tracing. d = Disable tracing r = Enable tracing (default) |
|
-v |
Set the NaturalAccess compatibility level to 0. |
|
-w |
Wait before exit. |
|
-? |
Access help. |
natprtest is a menu-driven interactive program. Enter one- and two-letter commands to execute NaturalAccess and NCC API, ADI API, MSPP or VCE API commands. Some commands prompt for additional information, such as frequencies and amplitudes for tone generators. For more information about the service commands, refer to the service-specific reference manuals.
The following table describes the available commands:
|
Function |
Command |
Description |
|
Help |
H |
Displays a table of available commands. |
|
Quit |
Q |
Exits from natprtest. |
|
Repeat command |
! |
Repeats the previous command. |
|
Abort dial |
AD |
Calls adiStopDial. |
|
Abort timer |
AT |
Calls adiStopTimer. |
|
Accept call |
CC |
Calls nccAcceptCall. |
|
Answer call |
AC |
Calls nccAnswerCall. |
|
Assert signal |
AS |
Calls adiAssertSignal. |
|
Attach context |
AX |
Calls ctaAttachContext. |
|
Attach object |
AO |
Calls ctaAttachObject. |
|
Block calls |
BC |
Calls nccBlockCalls. |
|
Call progress begin |
CB |
Calls adiStartCallProgress. |
|
Call progress stop |
CS |
Calls adiStopCallProgress. |
|
Call status |
C? |
Calls nccGetCallStatus. |
|
Change context |
CH |
Switches between different contexts created by natprtest with the CX or PX commands. |
|
Close services (new) |
CV |
Calls ctaCloseServices. |
|
Close services (old) |
CP |
Calls ctaDestroyContext. |
|
Collect digits |
CD |
Calls adiCollectDigits. |
|
Collect stop |
SC |
Calls adiStopCollection. |
|
Get context information |
CN |
Calls ctaGetContextInfoEx. |
|
Continuous event fetch |
CE |
Enables fetching of events. |
|
Create context |
CX |
Calls ctaCreateContextEx. |
|
Create persistent context |
PX |
Calls ctaCreateContextEx with the CTA_CONTEXT_PERSISTENT flag set. |
|
Create void context |
VX |
Calls ctaCreateContext with ctaqueuehd set to NULL_CTAQUEUEHD. |
|
Destroy context |
DX |
Calls ctaDestroyContext. |
|
Digit flush |
DF |
Calls adiFlushDigitQueue. |
|
Digit get |
DG |
Calls adiGetDigit. |
|
Digit peek |
DP |
Calls adiPeekDigit. |
|
Disable bit detector |
DB |
Calls adiStopSignalDetector. |
|
Disable DTMF detector |
DD |
Calls adiStopDTMFDetector. |
|
Disable energy detector |
DE |
Calls adiStopEnergyDetector. |
|
Disable MF detector |
DM |
Calls adiStopMFDetector. |
|
Disable tone detector |
DT |
Calls adiStopToneDetector. |
|
Disconnect call |
DC |
Calls nccDisconnectCall. |
|
Detach object |
DO |
Calls ctaDetachObject. |
|
Enable bit detector |
EB |
Calls adiStartSignalDetector. |
|
Encoding information |
EI |
Calls vceGetEncodingInfo. |
|
Set native play and record information |
SN |
Calls adiSetNativeInfo. |
|
Enable DTMF detector |
ED |
Calls adiStartDTMF. |
|
Enable energy detector |
EE |
Calls adiStartEnergyDetector. |
|
Enable MF detector |
EM |
Calls adiStartMFDetector. |
|
Enable tone detector |
ET |
Calls adiStartToneDetector. |
|
Enumerate contexts |
EC |
Lists contexts created by natprtest with the CX, PX, or VX commands. |
|
Find file |
FF |
Calls ctaFindFile. |
|
Format event |
FE |
Calls ctaFormatEventEx. |
|
FSK abort receive |
FA |
Calls adiStopReceivingFSK. |
|
FSK receive |
FR |
Calls adiStartReceivingFSK. |
|
FSK send |
FS |
Calls adiStartSendingFSK. |
|
Generate DTMFs |
GD |
Calls adiStartDTMF. |
|
Generate net tone |
GN |
Calls adiStartTones. |
|
Generate wink |
GW |
Calls adiStartPulse. |
|
Generation stop |
GS |
Calls adiStopTones. |
|
Generate user tone |
GT |
Calls adiStartTones. |
|
Get call status |
L? |
Calls nccGetLineStatus. |
|
Get context list |
CL |
Calls ctaQueryServerContexts. |
|
Get event source |
GM |
Calls ctaGetEventSources. |
|
Get object descriptor |
DH |
Calls ctaGetObjDescriptor. |
|
Get one event |
GE |
Enables fetching of one event. |
|
Get parameter ID |
PI |
Calls ctaGetParmID. |
|
Get server version |
RV |
Calls ctaGetVersionEx. |
|
Get service version |
SV |
Calls ctaGetServiceVersionEx. |
|
Hold call |
OC |
Calls nccHoldCall. |
|
Loopback event |
LE |
Calls ctaQueueEvent. |
|
Modify play gain |
MG |
Calls vceSetPlayGain. |
|
Modify play speed |
MS |
Calls vceSetPlaySpeed. |
|
Open services (new) |
OV |
Calls ctaOpenServices. |
|
Open services (old) |
OP |
Calls ctaCreateContext and ctaOpenServices. |
|
Place call |
PC |
Calls nccPlaceCall. |
|
Play file |
PF |
Calls vceOpenFile and vcePlayMessage. |
|
Play memory |
PM |
Calls vcePlayMessage. |
|
Play/receive status |
P? |
Call vceGetContextInfo. |
|
Play/receive stop |
PS |
Calls vceStop. |
|
Play/record status |
R? |
Calls vceGetContextInfo. |
|
Play/record stop |
RS |
Calls vceStop. |
|
Query capability |
CQ |
Calls nccQueryCapability. |
|
Query services |
ES |
Calls ctaQueryServices. |
|
Record file |
RF |
Calls vceCreateFile and vceRecordMessage. |
|
Record memory |
RM |
Calls vceCreateMemory, vceEraseMessage, and vceRecordMessage. |
|
Refresh parameters |
RP |
Calls ctaRefreshParms. |
|
Reject call |
JC |
Calls nccRejectCall. |
|
Release call |
RC |
Calls nccReleaseCall. |
|
Retrieve call |
RR |
Calls nccRetrieveCall. |
|
Send digits |
ND |
Calls nccSendDigits. |
|
Server shutdown |
SH |
Calls ctaShutdown. |
|
Set call handle |
IH |
Specifies active and held call handles. |
|
Set default server |
SS |
Calls ctaSetDefaultServer. |
|
Set event handler |
EH |
Calls ctaSetErrorHandler. |
|
Set event source |
SM |
Calls ctaSetEventSources. |
|
Set parameters |
PD |
Calls ctaGetParmByName and ctaGetParmInfo. |
|
Set server trace |
TR |
Calls ctaSetGlobalTraceMask. |
|
Set timeslot |
TS |
Specifies a timeslot to open the NCC service. |
|
Show state |
X |
Calls adiGetContextInfo and nccGetLineStatus. |
|
Signal bit query |
SQ |
Calls adiQuerySignalState. |
|
Start dial |
SD |
Calls adiStartDial. |
|
Start protocol |
SP |
Calls nccStartProtocol or adiStartProtocol. |
|
Start timer |
ST |
Calls adiStartTimer. |
|
Stop event fetch |
SE |
Disables continuous fetch of events. |
|
Stop protocol |
UP |
Calls nccStopProtocol or adiStopProtocol. |
|
Supervised transfer |
VT |
Calls nccTransferCall. |
|
Toggle pattern |
TP |
Calls adiAssertSignal. |
|
Trace |
W |
Calls ctaSetTraceLevel. |
|
Unblock calls |
UC |
Calls nccUnblockCalls. |
|
View parameters |
VD |
Calls ctaGetParmID and ctaGetParmInfoEx. |
|
Open MSPP port |
MO |
Calls ctaCreateContext and ctaOpenServices for the MSPP service. |
|
Close MSPP port |
MC |
Calls ctaDestroyContext. |
|
Create RTP Endpoint |
MR |
Calls mspCreateEndpoint with MSP_ENDPOINT_RTPFDX endpoint type. |
|
Create DS0 endpoint |
MX |
Calls mspCreateEndpoint with MSP_ENDPOINT_DS0 endpoint type. |
|
Create MSPP channel |
MH |
Calls mspCreateChannel. |
|
Connect MSPP channel |
MN |
Calls mspConnect. |
|
Enable MSPP channel |
MA |
Calls mspEnableChannel. |
|
Disable MSPP channel |
MB |
Calls mspDisableChannel. |
|
Get MSPP filter handle |
MF |
Calls mspGetFilterHandle. |
|
Set marker string |
MM |
Prompts for a string prefix for the next command response in the log file. |
You can enter commands while asynchronous functions execute, allowing you to execute multiple asynchronous functions concurrently or to stop functions. For example, you can run a tone detector (ET) and record voice (RF) simultaneously. Abort any of these functions by entering the respective stop command (DT and RS for tone and record). You can view NaturalAccess parameters (VD) or modify NaturalAccess parameters (PD). If ctdaemon is running, shared system global defaults are copied to the context. Otherwise, the local compiled defaults are copied. The commands prompt you to view or modify context parameters or global defaults.
natprtest writes trace messages to ctdaemon if ctdaemon is running. Use ctdaemon or ctaSetTraceLevel (W command) to set the global or local trace mask. To loop back an application event, use ctaQueueEvent (LE command).
natprtest includes functions for retrieving commands from the keyboard and executing them. These functions include:
|
Function |
Description |
|
PerformFunc |
Executes the keyboard commands and initiates Natural Access, NCC service, or ADI API functions. |
|
Main |
Processes options, creates NaturalAccess event queue, and goes into ctaWaitEvent loop. |
|
MyPlayAccess |
Voice play callback. |
|
MyRecAccess |
Voice record callback. |
|
MyEventHandler |
Displays the event and performs post-event processing (for example, closes files, prints extra information). |