Dialogic® Hardware Connectivity Manual
The Dialogic® Hardware
Connectivity Manual is written for those who plan and install solutions
that contain CG Series Media Boards, TX Series SS7 Boards, and the Vision™
Family of Servers and Gateways.
This manual provides detailed information about connectors and connector
pin assignments (interfaces) on Dialogic products, and defines the Dialogic
signal entry panel (SEP) solutions used to convert products with Dialogic®
MD1 RJ-21 interface and Dialogic® MD1 Mini RJ-21 interfaces to industry-standard
RJ-48C Telco interfaces.
Warning:
 |
Important
safety notes for telephony connections
Allow only qualified
technical personnel to install NMS hardware and its associated
telephone wiring.
Make sure the
PC chassis is grounded through the power cord or by other
means before connecting the telephone line.
If your system
requires an external power supply, make sure it is grounded
through the power cord or by other means.
Never install
telephone wiring during a lightning storm.
Never install
telephone jacks in wet locations.
Telephone companies
provide primary lightning protection for their telephone lines.
However, if a site connects to private lines that leave the
building, make sure that external protection is provided.
|