The ADI service provides functions for enabling and disabling DTMF and MF detection. By default, DTMF detection is enabled when a call is established.
The following functions enable and disable DTMF and MF tone detection:
|
Function |
Synchronous/ |
Description |
|---|---|---|
|
Asynchronous |
Starts DTMF detection (default is on). | |
|
Asynchronous |
Stops DTMF detection. | |
|
Asynchronous |
Starts the MF tone detector. | |
|
Asynchronous |
Stops the MF tone detector. |