The application differences between the AG 4040C and CG 6060C boards include:
|
AG 4040C board |
CG 6060C board |
|
ADI boardtype = ADI_BOARDTYPE_AG4000C_XX where XX represents 4T, 4E, 2T, or 2E Note: At the ADI and NCC levels, the AG 4040C board is identified as an AG 4000C board. |
ADI boardtype = ADI_BOARDTYPE_CG6060C |
|
Item |
AG 4040C board |
CG 6060C board |
|
Conferencing streams |
32 and 33 |
68 and 69 |
|
DSP signaling streams |
18 and 19 |
66 and 67 and cannot be connected to the CT bus. |
|
DSP voice streams |
16 and 17 |
64 and 65 |
|
Echo canceling streams |
34 and 35 |
70 and 71 |
|
HDLC pseudo streams (for AG 4000 compatibility) |
20-27 |
No HDLC pseudo streams. |
|
HDLC switching connections |
To support existing AG 4000 applications on an AG 4040C board, legacy HDLC switching connections are accepted without error, but they have no functional impact on the board. |
Legacy HDLC switching connections are not supported. |
Note: The CG boards use the same switch device name as AG boards, agsw.
|
AG 4040C board |
CG 6060C board |
|
Supports adiCommandEchoCanceller and adiModifyEchoCanceller. |
Supports adiCommandEchoCanceller and adiModifyEchoCanceller only if DSP-based echo canceling is used. If hardware echo canceling is used, individual channels can be enabled and disabled using swiConfigLocalTimeslot. |