<<

native play and record
    demonstration programs
       Native play and record demo: natprdemo
       Native play and record test: natprtest
    performing native play
    performing native record with decoding
    performing native record without decoding
natprdemo
natprtest
NaturalAccess
   before using Fusion
   creating Natural Access contexts and queues
   Fusion requirements
   Natural Access
NCC API
   placing outbound calls
   receiving inbound calls
nccAcceptCall
nccAnswerCall
nccPlaceCall
nccRejectCall
nccStartProtocol

OAM configuration
   configuring CG board resources
   configuring CG boards
   customizing the board configuration
   setting IP addresses with OAM board keywords
   specifying board keywords
   using OAM service functions with the RTP EMC
oamsys
   booting CG boards
   customizing the board configuration
   setting IP addresses with OAM board keywords
   using msppsamp

packet rate
pciscan

queries
    endpoint
    system
       board-level queries and unsolicited events
       CPU utilization queries
       Ethernet link status queries

resource keywords
   resource keywords
   sample E1 system configuration file
   setting up DCE transport capability
   setting up RFC 2833 capabilities
RFC 2833
    configuring compliant connections
       configuring channels for RFC 2833 support
       configuring RFC 2833 settings
       customizing RFC 2833 compliant channel behavior
       setting up RFC 2833 capabilities
    transferring non-DTMF RFC 2833 events
    unsolicited events
route availability events
   route availability events
   RTP and UDP endpoint route availability events
RTCP report events
RTP EMC MIB
RTP forking
RTP loopback connections
   loopback connections
   RTP loopback connections
RTP switching
    applications
       calling card service scenario
       monitoring application scenario
    limitations
    overview
rtpswitchsamp

T.30 fax
T.38 fax
    channels
    unsolicited events
    voice to fax switchover
       performing voice and fax switchover
       setting up fax and voice connections
       switching from voice to fax
ThroughPacket
    configuring board resources
    multiplexing
       implementing ThroughPacket multiplexing
       increasing data rate efficiency
       reducing packet rates
       ThroughPacket multiplexing overview
    ThroughPacket sample program
    TPKT endpoints
       connecting ThroughPacket endpoints
       creating TPKT Endpoints
       sending commands to TPKT endpoints
       specifying TPKT endpoint parameters
       ThroughPacket (TPKT) endpoints
tpktsamp

UDP ports
   creating TPKT Endpoints
   RTP and UDP endpoint route availability events
   setting IP addresses with OAM board keywords
UDPTL
unsolicited events
   board-level queries and unsolicited events
   overview of unsolicited events
   route availability events
   RTCP report events
   RTP and UDP endpoint route availability events
utilities

voice/fax switchover
   Performing voice and fax switchover
   Setting up fax and voice connections