Browse by Tags

Hello, we are working with SR 6.0 PCI SU 269 with DMV1200 board and windows server 2003, in one of the four E1 , we receive DTE1_BPVS and DTE1_BPVSOK consecutively when we are using the channels of this E1. However, the channel seems to work properly, one evidence of this is that we are recording the...

DM3 and JCT Currently, I am using 2 dialogic cards. Both cards are D600-JCT-2E1 running on SR6.0/Windows and Global call API. I would like to expand service by adding another card that can support the conferencing feature. So, I’ve considered DM3 board (DMV600BTEPEQ) as an additional board....

Hello everybody. I have SPCI4 and DMV1200A-4E1 and I am trying to make possible for 2 calls to be bridged. Actually it would be better to implement some sort of call transfer, but for the known reasons it is not possible or is very hard to do. So, it's decided to make this by bridging 2...

Hi everyone, I have a dm/ip 601 board with release 6.0 Su 250. When i make a call, the server sends packets to an public IP on internet through a router with another public IP. when this packet reach the SIPTrunk the SIPTrunk sends the acceptcall, but is sending it to a private LAN IP, this private...

hi everyone , i have the same error but in my error info ihave: Ld 0x801, GC (137) CCLIB specific, CC (6) on start media session rtf--> IpmB1C18 <==== ::OnStartAlgorithmSession(MsgExpect=2 MsgRc'ed=1) ERR1 CIPVscChannel ipmB1C18 ----- ::OnStartAlgorithmSession: ch=ipmB1C18 ErrorCode...

Hi, We have been using a Dialogic DMIP301 IP board for point to point VOIP connections. What we would like to do is register SIP extensions on a SIP server. In the Global Call IP Technology Guide there is a section on registration which includes some sample code. However I can find no reference to...

hi uttam thanks for your response... but if possible can u provide me any sample code to transmit DTMF tones and also to detect it. over IVR Thanks again

Hi, Lately, I tested our IVR system built with DM3 card through ISDN PRI protocal by making a call to our IVR. Two cases I implemented were calls with redirection and without redirection . With redirection test, briefly, was I made a call to my cell phone and redirecting that phone call to our IVR...

We are using Envox CTADE 9.2 with Dialogic System Release 6.0 PCI Build number 211 ,operating system Windows Server 2003 and the board is d/480JCT-2T1 .The problem we are experiencing is when the system receives consecutive phone calls the entire T1 rings busy and the system doesn't accepts any phone...

hi, I have a E1 dialogic card on which I want to build an application which detects and generates DTMF Tones. This application actually would be an ivr which will be transmitting and receiving DTMF tones and no Voice files would be played in real. I have used dx_getdig() to identify digits on...

Hi All, I want to know if there is any example of IVR application using DM3 board and ISDN protocol. I use DNI310. It has not to be complicated, just simple enough. At least it can accept call through ISDN phone line (not through IP). I had tried to make source code to open and closing device...