Browse by Tags

kindly help : how to change NI value in sccp config file in ss7 1145.sccpcfg.txt ================================ ************************************************************************* * * SCCP Configuration. * ************************************************************** * * Issue configuration...

kindly suggest me how to define NI value to sccpcfg.ms7 file NI value 2 (NA=2) already defined in config.txt file as like below formt: SNSLI:SNLINK=1,IPADDR=10.200.3.78,IPADDR2=10.200.3.110,HPORT=2905,PPORT=2910,SNTYPE=m3ua,SNEND=C,NA=2,SG=1; but this value not defined in sccpcfg.ms7 file. when...

The CLI is enabled on the analog line. It is routed through Philips Sopho is3000 PABX. Checked with connecting telephone instruments. do we need to change any param settings or like modifying any .cfg file from CFG directory of Dialogic. I am also unable to make call transfer. I used following...

I am new to Dialgoic and have an alarm from allip; that I need to find out what the issue is. When doing command allip; it outputs CLA = 3 CATEGORY = SYS ID = 0 TITLE = CONFIGURATION FAILED Is this saying that I have an error in my config.txt file? If yes, then how do I find what line the...

Hi, We are performing a demo with one operator and have to connect to HLR through Huawei STP but the association is not comming up. This is my config.txt CNSYS:IPADDR=10.44.8.59,PER=0,DAUD=Y; * SNAPI:AS=1,RC=1,TRMD=LS,OPC=450,SS7MD=ITU14; SNSLI:SNLINK=1,IPADDR=10.164.16.9,SNEND=C,SG=1,PPORT...

Hi all, we use a SS7HDE card running on MTP3 mode, with TDM 64 kbps (satellite link) when we use the following configuration every thing works fine but the links are unstable MTP_LINK 0 0 0 0 0 0-0 0 1 0x1003 when we change it to the following configuration links become stable and we receive...

Hi Mr. acoder and Mr. T.Blaise, I'm facing same problem with SCPEV_RTF_TTYPE. Have you solved it? Since GTT_Add doesnot work in config.txt, i'm so confused with this situation. Please help. Thanks,

Hi, I have four M3UA links set up but randomly some links become down and restores after a long while. As I'm unable to detect it in my program, when the links become down, it affects the transactions, i.e. many of the sent messages don't reach destination and are permanently failing. Application...

hi, is there any way to run both mtr and mtu on the same machine (e.g same ip addr using sigtran) AFAK only one GCT system can be set up in a system (one instance of gctload) I also recognized there could be only one LSS configuration for MAP in SCCP configuration commands

I need your help in GT translation. I want to send translate GT like all Outgoing SCCP requests with SSN 08 & GT (123456789) should be routed to 123456789 , 08 , <PC1 or PC2 whichever is UP>And all request with SSN 06 & GT (123456789) should be routed to 123456789 , 06 , <PC1...

I'm afraid that this is probably a RTFM question but I've really tried to find the answer in the docs and previous forum posts. How to configure Global Title routing in config.txt? I have a setup which connects to a signalling gateway with M3UA. The M3UA layer establish fine and I start mtr...

Dear All, I am a newbie, and trying to get into SS7. Now I have SPCI4 and DM/V1200A-4E1 cards installed on the system with Win2003Ser and connected by CTBus . I also have installed both System Release 6.0 and DSI components (in c:\septel). At the moment I am trying to perform a loopback...

Hi all Just to let you know there is a new application note "Enabling Dual-Chassis Fault Tolerance with the Dialogic® DSI SIGTRAN Stack" now available here.. http://www.dialogic.com/products/docs/appnotes/11770-sigtran-fault-tolerance-an.pdf The app note describes how to build...

I'm not getting support!!! I have 8 open calls more then a year! think B 4 you buy Case Id Abstract Status Opened Updated View C126691 Expand AbstractRequest to contact Daniel In Progress Dialogic 24-Aug-12 31-Jan-13 View C122012 Few fax calls are failing. In Progress Dialogic 30-Apr-12 07...

Hi We have a ss7 SPCI14 working fine with the configuration as below.But the same E1 cable when connected to the ss7hd board its failing . ******************************************************************************** * * Example Protocol Configuration File (config.txt) for use with...

Hello everyone! ( HMP4.1Lin) I have 2 boards signal board: spci4 (first 3 trunks) voice board: dni310 (4th trunk) in file gcss7.cfg I have: CGrp 0 dkB1 CGrp 1 dkB2 CGrp 2 dkB3 CGrp 3 dtiB1 in file config.txt I have: ISUP_CONFIG 0 0 0x4d 0x0474 4 128 ISUP_CFG_CCTGRP...

HI, Has anyone configured dialogic sigtran/ss7 stack for a node to be used as STP ? Can anyone share config to such configuration BR// Syed

Hi, My dialogic SS7 signaling system was built with 2 HOSTs and Dual-Mode SIUs. In order to establish communoication between HOST1 and HOST2, I'm trying to use one host application to send 2 messages created by meself to let both host applications could get that messages. Does someone...