Browse by Tags

I am Deploying SMS based service. Singnaling terminated to my SIUG20. Get connectivity from opertor MGW. At Application end gctload running in host machine. While i am sending SRI_SM , getting Response Timed Out. Switch Engineer asked " We can see from the trace that MSCS1 and HLR1...

hi all. I have two boards SPCI and DNI connected by CTbus, and I use 4 trunks (120 voice channels). First, second and third trunks in SPCI board and fourth trunk in DNI board When I run gctload -d , I see a messages: ... S7L:I0000 LIU Status : id=0 SYNC LOSS S7L:I0000 LIU Status : id=0 AIS S7L:I0000...

Normal 0 false false false EN-US X-NONE X-NONE ...

Hi All, When we deploy over Dialogic cards at MSC for Passive monitoring and MSC side give us a line to tap particular user information(Voice , FAX , SMS). Then which specific commands and parameters value we change in config.txt file when we monitoring the user information i.e. MTP_LINK or ISUP_CONFIG...

Nobody can help me to understand if it is a limitation of the stack ? In order to do it, we have asked customer to change configuration to have differents Host port for each associations.

my OPC is 1111 and I am connected to 2222(adjacent Point Code) and 3333 (through 2222). i.e. 2222 is working as STP. There will be only one m3ua link between 1111 and 2222. 2222 is again connected to 3333 through m3ua. Please provide m3ua config.txt for this configuration for 1111 node. ...

Hi, I have four M3UA links set up but randomly some links become down and restores after a long while. As I'm unable to detect it in my program, when the links become down, it affects the transactions, i.e. many of the sent messages don't reach destination and are permanently failing. Application...

Hi, Thank you very much Masood for your explanation, Now the pb is resolved and it works fine : I’ve omitted to change the remote_spc when i defined the remote sub-system : SCCP_SSR 3 RSS 1 0x08 0 Now, I’m connecting to a MSC and I’m getting this : (my PC is 4903) ...

Hello, I'm trying to have the stack respond to DAUD messages affecting the SGW PC, but i don't get any response. I establish correctly the M3UA connection, and the stack answers sendSriInfoForSm when mtr is running for example, but it just seems to ignore DAUD messages. I did set the DAUD...

hi, is there any way to run both mtr and mtu on the same machine (e.g same ip addr using sigtran) AFAK only one GCT system can be set up in a system (one instance of gctload) I also recognized there could be only one LSS configuration for MAP in SCCP configuration commands

There are simple IPSP and ASP config.txt examples in the SUA release notes. See the appropriate SUA release notes for the OS you are using from this page... http://www.dialogic.com/products/signalingip_ss7components/download/dsi-interface-protocol-stacks.htm The examples are in the appendix...

Dear, I'm trying to make a mono-homing M2PA configuration with 10 associations and 2 Host IP. But, we are faced to a problem when we create 2 associations with the same HPORT but with HIPADDR et IPADDR different. Is there any rule in Dialogic SCTP stack which forbidden to use 2 same HPORT....

Hello everybody. I'm trying to configure two HSL links on a SS7HDE board whose one side is connected to another Dialogic board and the other side is connected to a non-dialogic board. The liu that is connected to the other Dialogic board gets in service and stays operational and OK, but the other...

Hi How to set the Application Context version in the TCAP_CONFIG as my application worked well when the Application Context version was v2 and when the SGSN got upgraded the the version is 3 and im not able to process the request. Where this configuration has to be set. I read the manuals...

I need your help in GT translation. I want to send translate GT like all Outgoing SCCP requests with SSN 08 & GT (123456789) should be routed to 123456789 , 08 , <PC1 or PC2 whichever is UP>And all request with SSN 06 & GT (123456789) should be routed to 123456789 , 06 , <PC1...

Im facing an SCCP Error as below S7L:I0000 T 00028b5b M t8f01 i0000 f71 d22 s00 pc3094527610900030507024201024201050309090500 S7L:I0000 T 00028b5b M t8f01 i0003 f22 d33 s00 pc3094527610900030507024201024201050309090500 S7L:I0000 T 00028b5b M t0761 i0000 f33 def s03 p059d040001 S7L:I0000 SCCP Maintenance...

I think you may be setting the wrong bits in the config file. The ext options you're setting are 0x1091. This works out to the following ext option values from the scp_inc.h file... SCPXF_SCMG_SST_SUPPORT (0x1000), SCPXF_SEGMENTATION (0x0080), SCPXF_NO_CGPC (0x0001) Setting the segmentation...

We have a typical requirement, where Single board with 2pointcodes and connected to 2different sources MSC and SGSN with different point codes with two E1 Links. Individually with single point code both are fine but when i made both of them into same Config.txt they fail to. The First one 1230...

As a guide line I tend to allocate the same number of messages as the throughput of the system. If the system needs to run at 10,000 MSG/s then I allocate 10,000 messages. This ensures that the system can buffer half a seconds worth of messages before becoming congested. Any more than half a second I...

I'm afraid that this is probably a RTFM question but I've really tried to find the answer in the docs and previous forum posts. How to configure Global Title routing in config.txt? I have a setup which connects to a signalling gateway with M3UA. The M3UA layer establish fine and I start mtr...

Dear All, I am a newbie, and trying to get into SS7. Now I have SPCI4 and DM/V1200A-4E1 cards installed on the system with Win2003Ser and connected by CTBus . I also have installed both System Release 6.0 and DSI components (in c:\septel). At the moment I am trying to perform a loopback...

Hi all Just to let you know there is a new application note "Enabling Dual-Chassis Fault Tolerance with the Dialogic® DSI SIGTRAN Stack" now available here.. http://www.dialogic.com/products/docs/appnotes/11770-sigtran-fault-tolerance-an.pdf The app note describes how to build...

I'm not getting support!!! I have 8 open calls more then a year! think B 4 you buy Case Id Abstract Status Opened Updated View C126691 Expand AbstractRequest to contact Daniel In Progress Dialogic 24-Aug-12 31-Jan-13 View C122012 Few fax calls are failing. In Progress Dialogic 30-Apr-12 07...

Hi We have a ss7 SPCI14 working fine with the configuration as below.But the same E1 cable when connected to the ss7hd board its failing . ******************************************************************************** * * Example Protocol Configuration File (config.txt) for use with...

Hi Friends, I am facing a very big problem at my production site. I need your urgent help in this regard. I am getting PAcket loss from SCTP to M3UA. I am able to check all msg send by my application to network at ethernet level by using TCPDUMP command. But All packets those are coming from network...