Browse by Tags

Hi, I have started the Dialogic Sigtran Stack (M3UA+SCCP+TCAP+ISUP) with trial license ("-t" command line option). Application was configured for 20 Message Delivery Attempts per second (20 SRISM + 20 MTFSM), and when the traffic was continued for 5 minutes the Association is going...

Hi all, I have confused with the configuration of the SPCI4 card. It is very hard to understand for me the ISUP_CFG_CCTGRP configuration. * What is the meaning of the base_cic and base_cid? * Should base_cid be unique in system wide(1 or more SPCI cards) ? * When i use a loopback configuration...

hi, is there any way to run both mtr and mtu on the same machine (e.g same ip addr using sigtran) AFAK only one GCT system can be set up in a system (one instance of gctload) I also recognized there could be only one LSS configuration for MAP in SCCP configuration commands

Hi, My dialogic SS7 signaling system was built with 2 HOSTs and Dual-Mode SIUs. In order to establish communoication between HOST1 and HOST2, I'm trying to use one host application to send 2 messages created by meself to let both host applications could get that messages. Does someone...

I'm afraid that this is probably a RTFM question but I've really tried to find the answer in the docs and previous forum posts. How to configure Global Title routing in config.txt? I have a setup which connects to a signalling gateway with M3UA. The M3UA layer establish fine and I start mtr...

Dear All, I am a newbie, and trying to get into SS7. Now I have SPCI4 and DM/V1200A-4E1 cards installed on the system with Win2003Ser and connected by CTBus . I also have installed both System Release 6.0 and DSI components (in c:\septel). At the moment I am trying to perform a loopback...

Hi all Just to let you know there is a new application note "Enabling Dual-Chassis Fault Tolerance with the Dialogic® DSI SIGTRAN Stack" now available here.. http://www.dialogic.com/products/docs/appnotes/11770-sigtran-fault-tolerance-an.pdf The app note describes how to build...

Hi Alaa, Thanks for the Information. One more thing, is this "Throuhput in Kbps: 1232 kbps" is for outgoing traffic only or includes both way traffic (incoming + Outgoing). Regards, Komal Kothari

I'm not getting support!!! I have 8 open calls more then a year! think B 4 you buy Case Id Abstract Status Opened Updated View C126691 Expand AbstractRequest to contact Daniel In Progress Dialogic 24-Aug-12 31-Jan-13 View C122012 Few fax calls are failing. In Progress Dialogic 30-Apr-12 07...

Hi We have a ss7 SPCI14 working fine with the configuration as below.But the same E1 cable when connected to the ss7hd board its failing . ******************************************************************************** * * Example Protocol Configuration File (config.txt) for use with...

Hi Team,

Hello everyone! ( HMP4.1Lin) I have 2 boards signal board: spci4 (first 3 trunks) voice board: dni310 (4th trunk) in file gcss7.cfg I have: CGrp 0 dkB1 CGrp 1 dkB2 CGrp 2 dkB3 CGrp 3 dtiB1 in file config.txt I have: ISUP_CONFIG 0 0 0x4d 0x0474 4 128 ISUP_CFG_CCTGRP...

HI, Has anyone configured dialogic sigtran/ss7 stack for a node to be used as STP ? Can anyone share config to such configuration BR// Syed

Hi Mr. acoder and Mr. T.Blaise, I'm facing same problem with SCPEV_RTF_TTYPE. Have you solved it? Since GTT_Add doesnot work in config.txt, i'm so confused with this situation. Please help. Thanks,

Good morning! I am looking for the proper documentation on the different parameters for the PRM file which specifically deals with the values listed bellow. I was once pointed to springware_config_win_v1.pdf but this file makes no mentions of those parameters. I would like to know how these values...

Hello all, I have tries several PRI/ISDN protocols to talk to a Samsung PBX (Model IDCS 100). I think NT1 is the only one we can use to simulate the network (CO) but that one doesn't work at all. The only one that works half way is NE1 but the PBX seems not to recognize the DNIS. ANI is...

Hello 1) I like to know how to Enable/Disable HLC on HMP SU310 and above 2) somebody know whether Disabling HLC can damage the Fax calls(in/out) or if Disabling HLC is recommended when using only FAX's? Thanks

I m working on D/120JCT-LS Rev 2 a 4 port PCI analog card for CLI identification i tried using following.. dx_gtcallid(chdev, buffer) and also dx_getdig(chdev,&tpt[0], &digp, EV_SYNC) but no success. i found that this card contains a feature called On-Hook Reverse Polarity Detection...

Dear All We have to work with D300 JCT 5.11 SP and we cann't work with 6 yet. in the DCM we choose CTR4. the PBX is AVAYA and we try to work with PRI ISDN protocol in the PBX config the choose ENBLOCK/ENBLOCK but the protocol looks like OVERLAP. when we are expecting for ENBLOCK we got...

Hi, I need to get rid of the sidetone that comes back from analogue phone lines. Can I use echo cancellation on the D/41JCT-LS card to achieve this? I have tried setting the CSPExtraTimeSlot parameter to ON but this seems to have little or no effect. Do I need to modify the application software to listen...

I am From Egypt and I have “DIVA Media Processing Board - 4 ports Analog” and Dialogic Diva System Release 8.5 for windows Actually I have a problem with the DIVA configurations, that when the user hang up the phone the system cannot detect the disconnect tone that sent from the switch...

Hi, I wish to change the hookflash duration for a D/41JCT-LS board. The country setting is UK. Could you please tell me which parameter file I need to edit. I would have expected it to be uk_41j.prm but this file does not appear to exist. The choice seems to be uk_41d.prm, uk_41e.prm or uk_41h.prm...

When i try to install a dialogic d/600-jct-2e1 in windows server 2003, the windows recognize that's ok, but in DCM 6.0(Configuration Manager) recognize d/300 jctE1, someone can help me with this problem? thx

All, I currently have a cmall issue with 2 D/600JCT-2E1 cards! They are in a media gateway (specs below) as part of an 11 card call centre solution linked to a Noble Amcat CCS Dialler. 2 of the cards refuse to start (although they work in other gateways, we have 4) however they only give me...

I m working on D/4PCI analog card. I tried transfering call using dx_dial function. This is working fine with anlog line routed via Syntel EPABX. dx_dial(chdev,"&," + EXTNo ,NULL,EV_SYNC); where DTMF String &, is flash key When I try same on Siemens EPABX the line simply...