Browse by Tags

The CLI is enabled on the analog line. It is routed through Philips Sopho is3000 PABX. Checked with connecting telephone instruments. do we need to change any param settings or like modifying any .cfg file from CFG directory of Dialogic. I am also unable to make call transfer. I used following...

Hi , You can change your gcss7.cfg file adding following, or if it is already there uncommenting: # Circuit Group configuration, Group ID must match the values in config.txt # "trunk_name" could be any of "dkBx", "dtiBy" or "dumBz" # "base_TS"...

I m working on D/4PCI analog card. I tried transfering call using dx_dial function. This is working fine with anlog line routed via Syntel EPABX. dx_dial(chdev,"&," + EXTNo ,NULL,EV_SYNC); where DTMF String &, is flash key When I try same on Siemens EPABX the line simply...

I m working on D/120JCT-LS Rev 2 a 4 port PCI analog card for CLI identification i tried using following.. dx_gtcallid(chdev, buffer) and also dx_getdig(chdev,&tpt[0], &digp, EV_SYNC) but no success. i found that this card contains a feature called On-Hook Reverse Polarity Detection...

I am From Egypt and I have “DIVA Media Processing Board - 4 ports Analog” and Dialogic Diva System Release 8.5 for windows Actually I have a problem with the DIVA configurations, that when the user hang up the phone the system cannot detect the disconnect tone that sent from the switch...

Hi, I need to get rid of the sidetone that comes back from analogue phone lines. Can I use echo cancellation on the D/41JCT-LS card to achieve this? I have tried setting the CSPExtraTimeSlot parameter to ON but this seems to have little or no effect. Do I need to modify the application software to listen...