Browse by Tags

Hi, How to use Dialogic stack to find location of CDMA mobile? Do I need to download some other binary than DSI? Kindly also suggest which document to refer to work with stack. Thanks.

Hi, Handover Command message (for location updating in GSM) gives information about Cell id, can you please suggest, how to get IMSI (or TMSI) form this message. Thanks in advance.

hi all, I have D/300 JCT card. on which I am able to run an ivr program using VC ++ 6.0 as my development environment. I am trying to use the API's with VB .NET or C# .NET programming. Can anyone please help me with this. I also tried compiling the dialogic functionalities like playing...

Hi, I have an unusual problem. I developed video application that works fine. Problem is when application is running for example 0,5h widouth any call. After that time forst call causes following error: In dialogic Log: 12/13/2012 17:46:23.502 32244 3086407904 libm3g APPL API <:::: _m3g_Listen...

Hi, I have a DM/IP 601 board with Rel 6.0 SU269 and Windows 2008 server. I need process Re-invites request to implement, HOLD and TRANSFER button functionallity of a ip phone. To make theese i need use gc_acceptModifyCall and to for ican be use this order I have to enable the prmearlymedia in .config...

Hello, I bought the DMV300BTEPEQ board to receive fax using the Voice Guide software. When I try to receive a call, is everything working fine. The board accepts the call, the software receive the information and works fine. But, when I try to receive a fax, the call is broken. The board log...

We are currently running D/4PCI and ver. 5.1.1 using Win XP sp3 platform. We have purchased the D/4PCIu card and need to get 6.0 becuase the platform will be 64 bit. My question: What software changes, if any , will need to be made by going to version 6.0? The program is a failry simple routine that...

I am having problem starting Dialogic System Release 5.1.1. When I started DCM and run the application there is an error 16383 occur. Please help me to troubleshoot this problem. .

hi everyone , i have the same error but in my error info ihave: Ld 0x801, GC (137) CCLIB specific, CC (6) on start media session rtf--> IpmB1C18 <==== ::OnStartAlgorithmSession(MsgExpect=2 MsgRc'ed=1) ERR1 CIPVscChannel ipmB1C18 ----- ::OnStartAlgorithmSession: ch=ipmB1C18 ErrorCode...

Hi,I tested the sip head by sipp. I defined a message in uac.xml, as shown in Fig: " Userdata: hello" The problem is that how to get it in DCN . Using gc_util_next_parm_ex() is nothing

Hi I have installed 32 bit centos 5.4 and dialogic d/4 pciu card. When I run ./dlstart after first installation of linux SR 6.1 update then following error occurred [root@localhost bin]# ./dlstart Starting Dialogic Services... Starting Dialogic Runtime Tracing Server: [ OK ] /usr/dialogic//bin...

I am From Egypt and I have “DIVA Media Processing Board - 4 ports Analog” and Dialogic Diva System Release 8.5 for windows Actually I have a problem with the DIVA configurations, that when the user hang up the phone the system cannot detect the disconnect tone that sent from the switch...

The CLI is enabled on the analog line. It is routed through Philips Sopho is3000 PABX. Checked with connecting telephone instruments. do we need to change any param settings or like modifying any .cfg file from CFG directory of Dialogic. I am also unable to make call transfer. I used following...

We have windows 2003 installed , we purchased a valid hmp licence couple of years ago, it was installed on a windows 2003 server we updated to service pack 1 then service pack 2.. hmp does not start from dcm and gives General failure error , the licence still active we rolled back to windows...

I am trying to achive the following with as much accuracy as possibe: 1. Detect ringtones (especially for mobiles) which could be greetings/songs etc. from regional Indian language when dialing out 2. Successfully detect the following using Call Progress Analysis - busy, not reachable, voice mail...

Hi Everybody, I have 1 Dialogic DM/V1200A-4E1 PCI board, running on Windows XP Pro. I have no problem with installation(configuration set to be default) but I can't find the right Diagnostic tools. I have SR 6.0 for Windows(distributor version), with Service Update 239. I can't use "Dialogic...

Hi, Looking back in history, you will find that the Diva Server cards was manufactured by Eicon and the Dialogic Cards by Intel. Sometime ago Eicon purchased Dialogic from Intel and promptly renamed itself Dialogic. Hence you have the current Dialogic which is a mix of both Eicon (Diva Server) and Intel...

Hi , You can change your gcss7.cfg file adding following, or if it is already there uncommenting: # Circuit Group configuration, Group ID must match the values in config.txt # "trunk_name" could be any of "dkBx", "dtiBy" or "dumBz" # "base_TS"...

Sorry its not 4 port its 12 port D/120JCT-LS Rev 2 card. I tried increasing ring count but the result was same, i was not able to detect caller id i used function dx_gtcallid(chdev, buffer) but it returns following error message on ATDV_ERRMSGP(chdev); "Caller ID info/sub-msg not available"

Thanks for the infor and link Jeff...

Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Hi, We have a legacy IVR system using an Analog card which works. Currently we have been assigned the task...

Hello, We have made two outgoing calls to two IPPhones from Linux HMP3.1 server. Call flow : (A) IP Phone SPA941 <<------------- [ LInux HMP3.1 ] --------------->> (B) IP Phone SPA941. The calls has been generated by the server HMP and the media stream between (A) and (B) endpoints...

Hello I am currently looking for a Comms Developer for a client who are based in Yorkshire (UK). The role is offering roughly up to £40k and the skill set required is - Dialogic APIs, C++ or Java, Real time protocol development, PBX interfaces andcontrol, Understand layered architecture,...

I m working on D/120JCT-LS Rev 2 a 4 port PCI analog card for CLI identification i tried using following.. dx_gtcallid(chdev, buffer) and also dx_getdig(chdev,&tpt[0], &digp, EV_SYNC) but no success. i found that this card contains a feature called On-Hook Reverse Polarity Detection...

Hi all, I am getting issue with pci server...when i insert DMV 1200, the server got hanged...Can anyone helps me to resolve this??? SANDEEP SINGH