..

ss7 config.txt

..

Developer Group

Developer Group
Connect with thousands of other developers to brainstorm ideas, share best practices and tips - or just chat about the latest emerging technologies making noise in the field. And of course, get the most up-to-date service and support news from Dialogic.
Dialogic SS7 and SIGTRAN Signalling

ss7 config.txt

  • Hello, I have 1 E1 link. I use following ss7 configuration. When I make outgoing call, the trace log shows "CIP mask: 0x0 (signalling of incoming calls disabled)".  and I cannot receive incoming call. what's wrong with it?


    *         <board_id> <board_type> <flags> <serial>
    DIVA_BOARD     0          112        0x0     1320 

    * MTP_CONFIG <reserved1> <reserved2> <options>
    MTP_CONFIG 0 0 0x00040004

    * MTP_LINKSET <linkset_id> <adjacent_spc> <num_links> <flags> <local_spc> <ssf>
    MTP_LINKSET 0 2689 1 0x0000 2375 0x08

    * MTP_ROUTE <dpc> <norm_ls> <user_part_mask> <flags> <second_ls>
    MTP_ROUTE 2689 0 0x0020

    * MTP_LINK <link_id><linkset_id><link_ref><slc><board_id><blink><stream>
    MTP_LINK  0    0    0    0    0    0   0    16   0x0006

    * ISUP parameters:
    *
    * ISUP_CONFIG <res1><res2><user_id><options><num_grps><num_ccts>

    ISUP_CONFIG  0  0  0x4d  0x0414  1  32
    ********************************************************************************
    * Configure ISUP circuit groups:
    * ISUP_CFG_CCTGRP <gid><dpc><base_cic><base_cid><cic_mask><options><user_inst>
    *                                         <user_id><opc><ssf><variant><options2>

    ISUP_CFG_CCTGRP 0 2689 0x01 0x01 0x7FFF7FFF 0x249001e 0 0x4d 2375 0x8 1 0x00d0

    * CCT_RESOURCE <gid> <cic> <board_id> <liu_id> <timeslot>
    * gid:      group Id of circuit as defined ISUP_CFG_CCTGRP
    * cic:      circuit identification code
    * board_id: identifies the board
    * liu_id:   identifies the trunk
    * timeslot: identifies the timeslot (E1: 1 .. 31, T1: 1 .. 24)
    * ============
    * Circuits of group Id 0 on board 0, liu 0
    CCT_RESOURCE 0  0x01  0 0   1
    CCT_RESOURCE 0  0x02  0 0   2
    CCT_RESOURCE 0  0x03  0 0   3
    CCT_RESOURCE 0  0x04  0 0   4
    CCT_RESOURCE 0  0x05  0 0   5
    CCT_RESOURCE 0  0x06  0 0   6
    CCT_RESOURCE 0  0x07  0 0   7
    CCT_RESOURCE 0  0x08  0 0   8
    CCT_RESOURCE 0  0x09  0 0   9
    CCT_RESOURCE 0  0x0A  0 0  10
    CCT_RESOURCE 0  0x0B  0 0  11
    CCT_RESOURCE 0  0x0C  0 0  12
    CCT_RESOURCE 0  0x0D  0 0  13
    CCT_RESOURCE 0  0x0E  0 0  14
    CCT_RESOURCE 0  0x0F  0 0  15
    CCT_RESOURCE 0  0x11  0 0  17
    CCT_RESOURCE 0  0x12  0 0  18
    CCT_RESOURCE 0  0x13  0 0  19
    CCT_RESOURCE 0  0x14  0 0  20
    CCT_RESOURCE 0  0x15  0 0  21
    CCT_RESOURCE 0  0x16  0 0  22
    CCT_RESOURCE 0  0x17  0 0  23
    CCT_RESOURCE 0  0x18  0 0  24
    CCT_RESOURCE 0  0x19  0 0  25
    CCT_RESOURCE 0  0x1A  0 0  26
    CCT_RESOURCE 0  0x1B  0 0  27
    CCT_RESOURCE 0  0x1C  0 0  28
    CCT_RESOURCE 0  0x1D  0 0  29
    CCT_RESOURCE 0  0x1E  0 0  30
    CCT_RESOURCE 0  0x1F  0 0  31

    And Is it that each CCTGRP has to define 32 CIC?  I want to configure timeslot 1-15 for outgoing call and timeslot 17-31 for incoming call, how to configure?

    I tried below configuration and it doesn't work.

    ISUP_CFG_CCTGRP 0 2689 0x01 0x01 0x7FFF 0x249001c 0 0x4d 2375 0x8 1 0x00d0

    ISUP_CFG_CCTGRP 0 2689 0x11 0x11 0x7FFF 0x249001d 0 0x4d 2375 0x8 1 0x00d0


    CCT_RESOURCE 0  0x01  0 0   1
    CCT_RESOURCE 0  0x02  0 0   2
    CCT_RESOURCE 0  0x03  0 0   3
    CCT_RESOURCE 0  0x04  0 0   4
    CCT_RESOURCE 0  0x05  0 0   5
    CCT_RESOURCE 0  0x06  0 0   6
    CCT_RESOURCE 0  0x07  0 0   7
    CCT_RESOURCE 0  0x08  0 0   8
    CCT_RESOURCE 0  0x09  0 0   9
    CCT_RESOURCE 0  0x0A  0 0  10
    CCT_RESOURCE 0  0x0B  0 0  11
    CCT_RESOURCE 0  0x0C  0 0  12
    CCT_RESOURCE 0  0x0D  0 0  13
    CCT_RESOURCE 0  0x0E  0 0  14
    CCT_RESOURCE 0  0x0F  0 0  15
    CCT_RESOURCE 1  0x11  0 0  17
    CCT_RESOURCE 1  0x12  0 0  18
    CCT_RESOURCE 1  0x13  0 0  19
    CCT_RESOURCE 1  0x14  0 0  20
    CCT_RESOURCE 1  0x15  0 0  21
    CCT_RESOURCE 1  0x16  0 0  22
    CCT_RESOURCE 1  0x17  0 0  23
    CCT_RESOURCE 1  0x18  0 0  24
    CCT_RESOURCE 1  0x19  0 0  25
    CCT_RESOURCE 1  0x1A  0 0  26
    CCT_RESOURCE 1  0x1B  0 0  27
    CCT_RESOURCE 1  0x1C  0 0  28
    CCT_RESOURCE 1  0x1D  0 0  29
    CCT_RESOURCE 1  0x1E  0 0  30
    CCT_RESOURCE 1  0x1F  0 0  31

    Thanks very much.

  • hi,

    * For SS7HD PCI boards:

    * SS7_BOARD <board_id> <board_type> <flags> <code_file> <run_mode>

    *SS7_BOARD  0 SS7HDP 0x0043  ./DC/ss7.dc4  MTP2

    what is the meaning of the 0x0043  flag and why we are using this flag