..

routing -- how to add default route ?

..

Developer Group

Developer Group
Connect with thousands of other developers to brainstorm ideas, share best practices and tips - or just chat about the latest emerging technologies making noise in the field. And of course, get the most up-to-date service and support news from Dialogic.
Dialogic SS7 and SIGTRAN Signalling

routing -- how to add default route ?

  • Hopefully the description below explains what I am trying to do.... basically I think I am asking how to add default routes in....   

    I think my connections to the stp are IPSP..


                               /----- STP_A (pc 997) -------- External partner (pc 1051)

    MyDialogicbox--                                         X
    (pc 990)              \------ STP_B (pc 996) -------- External partner (pc 1050)


    Problem: External Partner is sending in a map PRN message.... in my STP, I am catching it and redirecting
    it to mydialogicbox..(normally, the map PRN would go elsewhere in the network, but I am stomping on the DPC and sending it to the dialogicbox)

    When the map PRN message comes to MyDialogicbox it has: OPC 1051, DPC 990
    in order to get the message up to my application above the stack, I set the mask in this command to 0x3fff   (Is this correct thing to do?)

    SCCP_SSR 1 RSP 997 0x0000 0x3fff

    now, when my application sends the response for the map PRN message, it has: OPC 990, DPC 1051

    dialogic stack doesn't not seem to route it to my STP... so I am thinking, I need a route to DPC 1051 via 997(my stp).

    when I try to add : something like these:
    *SNRTI:SNRT=1,DPC=1050,OPTIONS=0x0001;
    *SNRTI:SNRT=2,DPC=1051,OPTIONS=0x0001;
    *SNRLI:SNRL=1,SNRT=1,RAS=1;
    *SNRLI:SNRL=2,SNRT=2,RAS=2;

    the first two SNRTI commands will work and stack starts... but still does not route..
    and when I add the next SNRLI commands, stack does not come up it seems...


    Could someone point me in the right direction of what I need to do? what am I missing/doing wrong?

    full config below:

    Thanks in advance for any help.


    Bob

    -------------

    ********************************************************************************
    *
    * Configuration System Set
    * CNSYS: [IPADDR=,][IPADDR2=,][IPADDR3=,][IPADDR4=,][PER=,][DAUD=,][DUAL=,][AUTOACT=];
    * Always use DAUD=Y when communicating with a Cisco ITP
    CNSYS:IPADDR=10.2.16.4,PER=0,AUTOACT=N;
    * To set the SCTP HT Timeout:
    *
    * Configure SIGTRAN Signaling Link Initiate
    * SNSLI:SNLINK=,IPADDR=,[SG=,][SS7MD=,][IPADDR2=,][IPADDR3=,][IPADDR4=,][HIPADDR=,][HIPADDR1=,][HIPADDR2=,][HIPADDR3=,][HIPADDR4=,][HPORT=,][PPORT=,][SNEND=,][SNTYPE=,][M2PA=,][M2PA_VER=,][NA=,][M3UAHBT=,][SNMP=,][RTXI=,][RTXD=,][RTXB=];
    * Use SS7MD=ITU24 for 24-bit point codes in ITU-T
    SNSLI:SNLINK=1,IPADDR=10.2.10.72,HPORT=2990,PPORT=2907,SNTYPE=M3UA,SCTP_OPTIONS=0x0100,NA=1,SNEND=C,SNMP=Y; * STP A
    SNSLI:SNLINK=2,IPADDR=10.2.11.10,HPORT=2991,PPORT=2905,SNTYPE=M3UA,SCTP_OPTIONS=0x0100,NA=1,SNEND=C,SNMP=Y; * STP B
    *
    * Configure SIGTRAN Remote AS Configuration
    * SNRAI:RAS=,[RC=,][DPC=,][NASP=,][TRMD=,][SNMP];
    SNRAI:RAS=1,RC=10,DPC=997,SNMP=Y; * Remote AS for STP A
    SNRAI:RAS=2,RC=10,DPC=996,SNMP=Y; * Remote AS for STP B
    *
    * Configure SIGTRAN AS List Initiate
    * SNALI: SNAL=,RAS=,SNLINK=;
    SNALI:SNAL=1,RAS=1,SNLINK=1; * STP A
    SNALI:SNAL=2,RAS=2,SNLINK=2; * STP B
    *
    *SNRTI:SNRT=1,DPC=1050,OPTIONS=0x0001;
    *SNRTI:SNRT=2,DPC=1051,OPTIONS=0x0001;
    *SNRLI:SNRL=1,SNRT=1,RAS=1;
    *SNRLI:SNRL=2,SNRT=2,RAS=2;
    *

    * SCCP Parameters:
    *
    * Configure SCCP
    * SCCP_CONFIG <local_spc> <ssf> <options> [<options2> [<partner_id> <instance> <smb_flags>]]
    * <ssf> = 0x4/0x8/0xC is network indicator (NI) 1/2/3 (2 most significant bits)
    * <options> = 0x00800000 is support for SCCP segmentation and reassembly
    * <options> = 0x00010000 is to not set the point code in CgPA
    * <options> = 0x00020000 is to include the point code in CdPA
    * <options> = 0x00040000 is to remove the point code from CgPA
    * <options> = 0x00080000 is to remove the point code and set 'Route on GT' in CdPA
    * <options> = 0x00000100 is use for extended format management primitives
    * <options> = 0x00000040 is for 24-bit point codes in ITU-T
    * <options> = 0x00000008 is for enabling SMB
    SCCP_CONFIG 990 0x8 0x008d0108
    *
    * Configure SCCP Trace
    * SCCP_TRACE <op_evt_mask> <ip_evt_mask> <non_prim_mask>
    SCCP_TRACE 0x00000003 0x00000007 0x00000007
    * SCCP_TRACE 0x00000000 0x00000000 0x00000000
    *
    * Configure SCCP Sub-System Resource
    *
    * Define Remote Signaling Points
    * SCCP_SSR <ssr_id> RSP <remote_spc> <flags> <pc_mask> [<ssf> [<mtp_module_id>]]
    SCCP_SSR 1 RSP 997 0x0000 0x3fff
    SCCP_SSR 2 RSP 996 0x0000 0x0000
    *

    * Define Local Sub-Systems
    * SCCP_SSR <ssr_id> LSS <local_ssn> <module_id> <flags> <protocol>
    SCCP_SSR 3 LSS 0x06 0x14 0x0000 SCCP * HLR
    SCCP_SSR 4 LSS 0x07 0x14 0x0000 SCCP * VLR
    SCCP_SSR 5 LSS 0x08 0x14 0x0000 SCCP * MSC
    *
    * Configure SCCP Global Title Translation

    * Define GTT Rules
    * SCCP_GTT_PATTERN <pattern_id> <addr_indicator> <pc> <ssn> <global_title> [<gtai_pattern>]
    * SCCP_GTT_ADDRESS <address_id> <addr_indicator> <pc> <ssn> <global_title> [<gtai_replacement>]
    * SCCP_GTT <pattern_id> <mask> <primary_address_id> [<backup_address_id>]
    SCCP_GTT_PATTERN 1 0x10 0 0 0x001104 +/- * Match TT=0 and any GT
    SCCP_GTT_ADDRESS 1 0x11 990 0 0x001104 -/- * Send to dialogic application
    SCCP_GTT 1 K/R 1
    *
    SCCP_GTT_PATTERN 2 0x10 0 0 0x007204 +/- * Match TT=0 and any GT
    SCCP_GTT_ADDRESS 2 0x11 990 0 0x007204 -/- * Send to dialogic application
    SCCP_GTT 2 K/R 2
    *
    SCCP_GTT_PATTERN 3 0x10 0 0 0x041104 +/- * Match TT=4 and any GT
    SCCP_GTT_ADDRESS 3 0x11 997 0 0x001104 -/- * Send to STP  Primary, reset TT=0
    SCCP_GTT_ADDRESS 33 0x11 996 0 0x001104 -/- * Send to STP  Secondary, reset TT=0
    SCCP_GTT 3 K/R 3 33
    *
    SCCP_GTT_PATTERN 4 0x10 0 0 0x047104 +/- * Match TT=4 and any GT
    SCCP_GTT_ADDRESS 4 0x11 997 0 0x007104 -/- * Send to STP  Primary, reset TT=0
    SCCP_GTT_ADDRESS 44 0x11 996 0 0x007104 -/- * Send to STP  Secondary, reset TT=0
    SCCP_GTT 4 K/R 4 44
    *

  • Is there a better place to post for help/that is more active??  another forum?