Hi ,

Can u please give us examples of the description of the

commands passed in the command file and its interpretation.Would be nice if

there is a document explaining all the commands its format definition and interpretation of the response from the command.I find a typical command will be set in the format below.But

interpretation of the same seems confusing.

M-I-t-i-f-d-r-e-s-p.When

we tried inter SIU connectivity and card and SIU we came across two

error namely.SCPEV_RTF_NET_FAIL and SCPEV_RTF_SS_FAIL.

>From the docs i see the first related to DPC unknown or prohibited and

second one LSS and RSS prohibited.You help on the same greatly appreciated.



response from the typical command file



M-t7740-i0000-fef-d33-r8000-p018380223322efef0000045a011000ef0000000000000000000000000000000000000000000000000000000d00000000000000000000000000000000

M-t7741-i0000-fef-d33-r8000-p00031401000000000800000000000000000000000000000000000000000000000000000000000000

M-t7741-i0000-fef-d33-r8000-p00031401000000000700000000000000000000000000000000000000000000000000000000000000

M-t7741-i0000-fef-d33-r8000-p00031401000000000600000000000000000000000000000000000000000000000000000000000000

M-t7741-i0000-fef-d33-r8000-p0003ef0100000000c800000000000000000000000000000000000000000000000000000000000000

M-tc744-i0008-fef-d33-r8000-p0101000000000000

M-tc744-i0007-fef-d33-r8000-p0101000000000000

M-tc744-i0006-fef-d33-r8000-p0101000000000000

M-t7741-i0000-fef-d33-r8000-p000100000000045b0000000000000000000000000000000000000000000000000000000000000000

M-t7741-i0000-fef-d33-r8000-p000200000000045b0800000000000000000000000000000000000000000000000000000000000000

M-tc744-i0008-fef-d33-r8000-p0101000000000000

M-t7780-i0000-fef-d14-r8000-p00001533efef00001000100020000100000080000410080200ff0000000000000000000000000000

M-t5795-i0000-fef-d14-r8000-p000000070000000f00000000

M-t77e4-i0000-fef-d15-r8000-p001d14efefef000080000000800010001000100000000000



M-t57e6-i0000-fef-d15-r8000-p000000030000000300000000







M-t7745-i0000-fef-d33-r8000-p080b12080011042658050000f4090d535a04080011042658050000f4

M-t7745-i0000-fef-d33-r8000-p080b1208001204265805400400090d535a04080012042658050000f4

M-t7745-i0000-fef-d33-r8000-p080c120800120426580540040000090d535a04080012042658050000f







SIU System.txt

system.txt







* 12 mars 1999



*



* Module Id's running locally on the host machine:



*



LOCAL 0xb0 * rsi Module Id



LOCAL 0xef * REM_API_ID Module Id (s7_log)



LOCAL 0xfd * rsicmd Module Id



LOCAL 0x1d * mtue Module Id



LOCAL 0x2d * mtur Module Id



*



* Redirect modules running on the SIU to RSI:



*



REDIRECT 0x20 0xb0 * SSD module Id



REDIRECT 0xdf 0xb0 * SIU_MGT module Id



REDIRECT 0x22 0xb0 * MTP3 module Id



REDIRECT 0x14 0xb0 * TCAP module Id



REDIRECT 0x33 0xb0 * SCCP module Id



REDIRECT 0x32 0xb0 * RMM module Id



REDIRECT 0x23 0xb0 * ISUP module Id



REDIRECT 0x4a 0xb0 * TUP/NUP module Id



REDIRECT 0x15 0xb0 * MAP module Id



*



* Now start-up the Host tasks ....



* The s7_log is started by go.SS7 and send traces to

/home/nilcom/logs/tcap.log



* FORK_PROCESS /home/nilcom/samoussa/bin/dk/s7_log



* Now, paths of process are relatives with SMA_DIR_ROOT



FORK_PROCESS bin/dk/rsi -rbin/dk/rsi_lnk -pvar/tmp/ -l1



*



* Start the Host-SIU link:



*



* FORK_PROCESS bin/dk/rsicmd 0 0xef 0 10.236.234.202 9000



FORK_PROCESS bin/dk/rsicmd 0 0xef 0 10.32.15.251 9000



*



* Example application programs:



*



* start the MAP traces on the SIU



* FORK_PROCESS ./s7_play -fmaptrace.ms7



* start the MTP traces on the SIU



FORK_PROCESS bin/dk/s7_play -fetc/GTT.ms7









SIU Config



config.txt



* DATAK2

*

* DSC231 Protocol Configuration File (config.txt)^M

* Refer to the DSC131/DSC231 User Manual.^M

*

* SIU commands :^M

* Set the SIU instance. Set to SIUA for standalone, SIUA or SIUB for

dual oper* SIU_INSTANCE = SIUA | SIUB^M

*^M

SIU_INSTANCE SIUA

*^M

* Define the network address of this SIU :^M

* SIU_ADDR ^M

*^M

SIU_ADDR 10.32.15.250

*

* Define the network address of the partner SIU (dual operation only) :^M

* SIU_REM_ADDR ^M

*^M

* SIU_REM_ADDR 10.32.10.4

*^M

* Define the number of hosts that this SIU will connect to :^M

* SIU_HOSTS ^M

*^M

SIU_HOSTS 1

*^M

* Set physical Interface Parameters :^M

* PCCS6_BOARD ^M

* PCCS3_BOARD ^M

*^M

* 0x0003 = Slave

* 0x0002 = Master clock

* 0 = default (2 PCM)

PCCS6_BOARD 0 4 1 0x0003

* PCCS6_BOARD 0 4 2 0x0003

*^M

* Reconfigure SIU to provide ITU operation over T1

* LIU_CONFIG

* liu_type = 1(disabled) 2(E1 75ohms) 3(E1 120ohms) 4 T1

* line_code = 1 (HDB3 E1 only) 2(AMI) 3(AMI for T1) 4(B8ZS T1 only)

* frame_format = 1(E1 DF) 2(E1 CRC4) 3(F4) 4(D3/D4) 5(D3/D4) 6(ESF T1)

* 7 (ESF T1) 8(SLC 96 T1)

LIU_CONFIG 4 0 3 1 2 2

* LIU_CONFIG 4 1 3 1 2 2

* MTP Parameters :^M

* MTP_CONFIG ^M

*^M

MTP_CONFIG 1114 0x8 0x0000

*^M

*

* MTP_LINKSET 0 9217 2 0x0000 15361 0x6

MTP_LINKSET 0 1115 2 0x0000 1114 0x8

* MTP_LINKSET 1 1217 1 0x0000 1097 0x8

* MTP_LINKSET 1 1097 1 0x8000 1097 0x8

*

* Define signalling links :^M

*

MTP_LINK 0 0 0 0 4 0 16 16 0x06

MTP_LINK 1 0 1 1 4 1 16 17 0x06

* MTP_LINK 2 1 0 0 4 2 0x11 16 0x06

* MTP_LINK 3 1 1 2 4 3 0x11 17 0x06

* MTP_LINK 2 0 1 2 4 2 16 17 0x06

*

* Define a route for each remot signalling point :^M

* MTP_ROUTE ^M

* The MSC connected to, the IGP,the HLR-MSC, the SMSC, the GMSC,

* The GMSC

* MTP_ROUTE 1217 0 0x0008 0x0000 0 0xfff

MTP_ROUTE 9088 0 0x0008

MTP_ROUTE 1115 0 0x0008

* ISUP Parameters :^M

* ISUP_CONFIG

^M

*

* ISUP_CONFIG 2 0x8 0x1d 0x0000 8 96^M

*

* Define ISUP circuit (groups) :^M

*

* ISUP_CFG_CCTGRP 0 1 1 0x01 0x7fff7fff 0x0003 0x00 0x1d 2 0x8^M

*

*

* TUP Parameters :^M

* TUP_CONFIG ^M

*^M

* TUP_CONFIG 2 0x8 0x1d 0x0000 128 4096^M

*^M

* Define TUP circuit (groups) :^M

*^M

* TUP_CFG_CCTGRP 0 1 1 1 0x7fff7fff 0x0000 0x00^M

*^M

* NUP Parameters :^M

* NUP_CONFIG [

]^M

*^M

* NUP_CONFIG 2 0x8 0x1d 0x0000 8 32^M

*^M

* Define NUP circuit (groups) :^M

*^M

* NUP_CFG_CCTGRP 0 1 1 1 0x7fff7fff 0x0003 * 0x00^M

*^M

* SCCP Parameters :^M

* SCCP_CONFIG ^M

SCCP_CONFIG 1114 0x8 0x000d8000

* SCCP_CONFIG 15361 0x8 0x000d8000

*^M

* Define SCCP Remote signalling points :^M

* SCCP_RSP ^M

*The GMSC

SCCP_RSP 1115 0x00

SCCP_RSP 9088 0x00

* Define all local sub-systems :

* SCCP_LSS

* In DATAK2 which simultates MSC (ssf = 8)

* and HLR (ssf = 6)

* NILCOM defines 2 ssf with same local_pc

*

SCCP_LSS 0x06 0x1d 0x0 MAP

SCCP_LSS 0x07 0x1d 0x0 MAP

SCCP_LSS 0x08 0x1d 0x0 MAP

*

* Define all remote sub-systems :

* SCCP_RSS ^M

* The GMSC

SCCP_RSS 1115 0x08 0x0

SCCP_RSS 9088 0x08 0x0

* The HLRs

SCCP_RSS 1115 0x06 0x0

SCCP_RSS 9088 0x06 0x0

* Allow the REM_API_ID (0xef) to receive notification of state changes^M

* of other signalling points or sub-systems.^M

*^M

SCCP_LSS 200 0xef 0

* SCCP_CONC_LSS 200 RSS 1 0x06

*

* TCAP_TRACE 0x00000007 0x0000000f 0x00000000

* TCAP_CONFIG 0x0000 1024 0x8000 1024 0x0000 0x00

* MTP_TRACE 0x20 0x2

* MTP_TRACE 0x00000021 0x00000003 0x0001ffff

*

*

* MAP_CONFIG 0x2d

*

* Configure connection of bearer channels through the SIU.^M

* STREAM_XCON ^M

*^M

* STREAM_XCON 4 16 17 3 0xfffefffe 0x00^M

* STREAM_XCON 8 16 17 3 0xfffefffe 0x00^M



*

* End of file^M





Thanks

Rajesh